Wooden Driveway Gates Framed, Ledge & Braced 6ft 1800mm Flat Top

Wooden-Driveway-Gates-Framed-Ledge-Braced-6ft-1800mm-Flat-Top-01-aehu Wooden Driveway Gates Framed, Ledge & Braced 6ft 1800mm Flat Top
Wooden Driveway Gates Framed, Ledge & Braced 6ft 1800mm Flat Top
Wooden Driveway Gates Framed, Ledge & Braced 6ft 1800mm Flat Top
Wooden Driveway Gates Framed, Ledge & Braced 6ft 1800mm Flat Top

Wooden Driveway Gates Framed, Ledge & Braced 6ft 1800mm Flat Top
We have been manufacturing garden buildings products since 2008, we make all our product to last. All timber is untreated and will require a wood preservative before installation. 95mm x 45mm Stiles and Top Rail. 95mm x 30mm Mid Rail, Bottom Rail and Bracing. All joints are glue and Screwed. 15mm Tongue and groove boards with v-groove one side (which are glued and nailed). Height Up to The Top Rail is 1800mm, with Decorative Horn which is an additional 3(70mm). On these Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 2100mm wide gate Board Quantity may vary on different width gates). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. The item “Wooden Driveway Gates Framed, Ledge & Braced 6ft 1800mm Flat Top” is in sale since Sunday, October 8, 2017. This item is in the category “Garden & Patio\Garden Fencing\Garden Gates”. The seller is “jukejoinery2016″ and is located in Misterton, Nottinghamshire. This item can be shipped to United Kingdom.
  • Brand: Juke Joinery
  • MPN: Does Not Apply
  • Material: Redwood Timber
  • Sub-Type: Wooden Garden Gates Wooden Driveway Gates Double
  • Type: Driveway Gate
  • Mechanism: Dual Swing Gate

Wooden Driveway Gates Framed, Ledge & Braced 6ft 1800mm Flat Top

Comments are closed.