Tag Archive for mortice

Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden-Softwood-Swan-Neck-Driveway-Gates-Mortice-Tenoned-6ft-1800mm-01-nqss Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Heavy Duty Mortice & Tenoned Driveway Gates. Swan Neck Top Style. We have been manufacturing garden products since 2008, we make all our product to last. All timber is untreated and will require a wood preservative before installation. You Will Receive a Pair of Redwood Driveway Gates Only (No Posts Or Ironwork). 70mm x 95mm Stiles and Head. 38mm x 95mm Top Rail, Mid Rail, Bottom Rail and Bracing. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned). Height Up to the Top of Rail is 1800mm lowest point, with Decorative Horn which is an additional 4(100mm) Plus rise up to 350mm. On these Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3600mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.
  • 1800mm High Flat Top Width: 1800mm
  • type of wood: Redwood
  • Material: Wood
  • Type: Driveway Gate
  • Mechanism: Dual Swing Gate
  • Brand: Juke Joinery

Wooden Softwood Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden-Oak-Swan-Neck-Driveway-Gates-Mortice-Tenoned-6ft-1800mm-01-zpk Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm
Heavy Duty Mortice & Tenoned Oak Driveway Gates. We have been manufacturing garden products since 2008, we make all our product to last. All timber is untreated and will require a wood preservative before installation. You Will Receive a Pair of Oak Driveway Gates Only (No Posts Or Ironwork). 70mm x 95mm Stiles and Head. 38mm x 95mm Top Rail, Mid Rail, Bottom Rail and Bracing. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins). Height Up to the Top of Rail is 1800mm lowest point, with Decorative Horn which is an additional 4(100mm) Plus rise up to 350mm. On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3000mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.
  • 1800mm High Flat Top Width: 3900mm
  • Custom Bundle: No
  • Material: Wood
  • Type: Driveway Gate
  • type of wood: European Oak
  • Modified Item: No
  • Brand: Juke Joinery
  • Non-Domestic Product: No
  • Mechanism: Dual Swing Gate

Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Oak Open Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden-Oak-Open-Palisade-Driveway-Gates-Mortice-Tenoned-6ft-1800mm-01-wy Wooden Oak Open Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Open Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Oak Open Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm
Heavy Duty Mortice & Tenoned Oak Driveway Gates. PLEASE NOTE THAT WE CAN MANUFACTURE MORE THAN ONE SET OF GATES IF REQUIRED, PLEASE MESSAGE ME FOR MORE INFORMATION. We have been manufacturing garden products since 2008, we make all our product to last. All timber with come untreated. And will require a wood preservative before installation. You Will Receive a Pair of Oak Driveway Gates Only. 70mm x 145mm Outside Styles. 70mm x 110mm Centre Styles. 70mm x 145mm – 110mm. 25mm x 95mm Bracing. 35mm x 35mm Spindles. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. Height Up to the Top of Rail is 1800mm lowest point, with Decorative Horn which is an additional 3(75mm) Plus rise 120mm. On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3800mm wide set of gates Spindle Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.
  • 1800mm High Flat Top Width: 3900mm
  • Custom Bundle: No
  • Material: Wood
  • Type: Driveway Gate
  • type of wood: European Oak
  • Modified Item: No
  • Brand: Juke Joinery
  • Mechanism: Dual Swing Gate
  • Non-Domestic Product: No

Wooden Oak Open Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden-Oak-Swan-Neck-Palisade-Driveway-Gates-Mortice-Tenoned-6ft-1800mm-01-ch Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm
Heavy Duty Mortice & Tenoned Oak Driveway Gates. Swan Neck Palisade Style. PLEASE NOTE THAT WE CAN MANUFACTURE MORE THAN ONE SET OF GATES IF REQUIRED, PLEASE MESSAGE ME FOR MORE INFORMATION. We have been manufacturing garden products since 2008, we make all our product to last. All timber with come untreated. (Picture shown is treated). And will require a wood preservative before installation. You Will Receive a Pair of Oak Driveway Gates Only (No Posts, Ironwork or Motors). 70mm x 120mm Stiles. 45mm x 95mm Mid Rail and Bracing. 45mm x 70mm Spindles with 45 degree Chamfer. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins). Height Up to the Top of Rail is 1800mm lowest point, with Decorative Horn which is an additional 5(125mm) Plus rise up to 350mm. The Spindles are 1/3 and the Board is 2/3 of the hight of the gate. On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3900mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.
  • 1800mm High Flat Top Width: 3900mm
  • Custom Bundle: No
  • Material: Wood
  • Type: Driveway Gate
  • type of wood: European Oak
  • Modified Item: No
  • Brand: Juke Joinery
  • Mechanism: Dual Swing Gate
  • Non-Domestic Product: No

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft

Wooden-Oak-Swan-Neck-Palisade-Driveway-Gates-Mortice-Tenoned-5ft-01-ptje Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft
Heavy Duty Mortice & Tenoned Oak Driveway Gates. Swan Neck Round Palisade Style. PLEASE NOTE THAT WE CAN MANUFACTURE MORE THAN ONE SET OF GATES IF REQUIRED, PLEASE MESSAGE ME FOR MORE INFORMATION. We have been manufacturing garden products since 2008, we make all our product to last. All timber with come untreated. And will require a wood preservative before installation. You Will Receive a Pair of Oak Driveway Gates Only. (Picture shown is Iroko Plus Sample picture of the oak shown). 70mm x 120mm Stiles. 45mm x 95mm Bracing. 60mm x 60mm Spindles with 30mm radius Chamfer. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins). Height Up to the Top of Rail is 1500mm lowest point, with Decorative Horn which is an additional 5(125mm) Plus rise up to 350mm. The Spindles are 1/3 and the Board is 2/3 of the hight of the gate. On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3900mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.
  • Item Width: 3300mm
  • Brand: Juke Joinery
  • Non-Domestic Product: No
  • Type: Driveway Gate
  • Custom Bundle: No
  • Material: Wood
  • type of wood: European Oak
  • Modified Item: No
  • Mechanism: Dual Swing Gate

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft

Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden-Oak-Bow-Top-Driveway-Gates-Mortice-Tenoned-6ft-1800mm-01-vzc Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Heavy Duty Mortice & Tenoned Oak Driveway Gates. PLEASE NOTE THAT WE CAN MANUFACTURE MORE THAN ONE SET OF GATES IF REQUIRED, PLEASE MESSAGE ME FOR MORE INFORMATION. We have been manufacturing garden products since 2008, we make all our product to last. All timber is untreated and will require a wood preservative before installation (Picture show is treated). You Will Receive a Pair of Oak Driveway Gates Only (No Posts Or Ironwork). 70mm x 95mm Stiles and Head. 38mm x 95mm Top Rail, Mid Rail, Bottom Rail and Bracing. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins). Height Up to the Top of Rail is 1800mm lowest point, with Decorative Horn which is an additional 4(100mm) Plus rise up to 350mm. On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3300mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.
  • 1800mm High Flat Top Width: 3300mm
  • Custom Bundle: No
  • Material: Wood
  • Type: Driveway Gate
  • type of wood: European Oak
  • Mechanism: Dual Swing Gate
  • Brand: Juke Joinery
  • Modified Item: No
  • Non-Domestic Product: No

Wooden Oak Bow Top Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden-Softwood-Flat-Top-Driveway-Gates-Mortice-Tenoned-6ft-1800mm-01-rt Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm
Heavy Duty Mortice & Tenoned Driveway Gates. We have been manufacturing garden products since 2008, we make all our product to last. All timber is untreated and will require a wood preservative before installation. You Will Receive a Pair of Redwood Driveway Gates Only (No Posts Or Ironwork). 70mm x 95mm Stiles and Head. 38mm x 95mm Mid Rail, Bottom Rail and Bracing. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned). Height Up to the Top of Rail is 1800mm lowest point, with Decorative Horn which is an additional 4(100mm). On these Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3400mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.
  • 1800mm High Flat Top Width: 1800mm
  • Brand: Juke Joinery
  • Material: Wood
  • type of wood: Redwood
  • Type: Driveway Gate
  • Mechanism: Dual Swing Gate

Wooden Softwood Flat Top Driveway Gates Mortice & Tenoned 6ft 1800mm

Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm

Wooden-Oak-Driveway-Gates-Framed-Ledge-Braced-Mortice-Tenoned-6ft-1800mm-01-eh Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm
Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm
Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm
Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm
Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm
Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm
Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm
Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm
Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm

Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm
Heavy Duty Mortice & Tenoned Oak Driveway Gates. We have been manufacturing garden products since 2008, we make all our product to last. All timber is untreated and will require a wood preservative before installation. You Will Receive a Pair of Oak Driveway Gates Only (No Posts Or Ironwork). 70mm x 95mm Stiles and Top Rail. 38mm x 95mm Mid Rail, Bottom Rail and Bracing. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins). Height Up to the Top of Rail is 1800mm, with Decorative Horn which is an additional 4(100mm). On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3600mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.
  • 1800mm High Flat Top Width: 4200mm
  • Custom Bundle: No
  • Material: Wood
  • Type: Driveway Gate
  • type of wood: European Oak
  • Mechanism: Dual Swing Gate
  • Brand: Juke Joinery
  • Modified Item: No
  • Non-Domestic Product: No

Wooden Oak Driveway Gates Framed, Ledge & Braced Mortice & Tenoned 6ft 1800mm

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft

Wooden-Oak-Swan-Neck-Palisade-Driveway-Gates-Mortice-Tenoned-6ft-01-vx Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft
Heavy Duty Mortice & Tenoned Oak Driveway Gates. Swan Neck Round Palisade Style. We have been manufacturing garden products since 2008, we make all our product to last. All timber with come untreated. And will require a wood preservative before installation. You Will Receive a Pair of Oak Driveway Gates Only. (Picture shown is Iroko Plus Sample picture of the oak shown). 70mm x 120mm Stiles. 45mm x 95mm Bracing. 60mm x 60mm Spindles with 30mm radius Chamfer. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins). Height Up to the Top of Rail is 1800mm lowest point, with Decorative Horn which is an additional 5(125mm) Plus rise up to 350mm. The Spindles are 1/3 and the Board is 2/3 of the hight of the gate. On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3900mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.
  • Item Width: 4200mm
  • Brand: Juke Joinery
  • Non-Domestic Product: No
  • Type: Driveway Gate
  • Custom Bundle: No
  • Material: Wood
  • type of wood: European Oak
  • Modified Item: No
  • Mechanism: Dual Swing Gate

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 6ft

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm

Wooden-Oak-Swan-Neck-Palisade-Driveway-Gates-Mortice-Tenoned-5ft-1500mm-01-vtp Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm
Heavy Duty Mortice & Tenoned Oak Driveway Gates. Swan Neck Round Palisade Style. We have been manufacturing garden products since 2008, we make all our product to last. All timber with come untreated. And will require a wood preservative before installation. You Will Receive a Pair of Oak Driveway Gates Only. (Picture shown is Iroko Plus Sample picture of the oak shown). 70mm x 120mm Stiles. 45mm x 95mm Bracing. 60mm x 60mm Spindles with 30mm radius Chamfer. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins). Height Up to the Top of Rail is 1500mm lowest point, with Decorative Horn which is an additional 5(125mm) Plus rise up to 350mm. The Spindles are 1/3 and the Board is 2/3 of the hight of the gate. On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3900mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.
  • 1800mm High Flat Top Width: 1800mm
  • Custom Bundle: No
  • Material: Wood
  • Type: Driveway Gate
  • type of wood: European Oak
  • Modified Item: No
  • Brand: Juke Joinery
  • Mechanism: Dual Swing Gate
  • Non-Domestic Product: No

Wooden Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm