KINDER TIMBER PRODUCT’S. A PAIR OF QUALITY HANDMADE. THERMOWOOD SWAN NECK /ARCHED DRIVE WAY / GARDEN GATES. (PICTURE IS FOR ILLUSTRATION PURPOSES ONLY AS SHOWS A UNTREATED SOFTWOOD VERSION). WITH REBATED CENTER STILES (TO FIT TOGETHER). A Pair to fit an opening of 2550mm Wide x 1800mm High. Width being the Total Opening Size (not Size of Each Gate). Height is to the Highest point on the Gates. (Difference between highest and lowest point is 5). 94mm x 44mm Stiles. 220mm X 44mm Top Rail. 145mm x 28mm Center and Bottom Rail. 145mm x 28mm Bracing. All our Softwood Timber is a Planed 5th Scandinavian redwood (High quality pine). 14mmTongue and Groove Boards (finished size). Due to transportation purposes there is a slight horn left on the bottom of the gates, this will need removing before fitting. These Gates Can be Made to Measure. All our Products are Made by Hand by Us. Because of the weight of these, we recommend hook and bands (not conventional hinges) to hang these Gates/Doors. The right hand gate (as looking from the front) will open outwards first. As standard unless requested otherwise. The process involves heating timber to a temperature of 180-220 degrees Celsius which darkens the colour. While at the same time protecting it with steam. 100% Natural no chemicals are added. Thermowood is an environmentally friendly and fully recyclable product. It remains dimensionally stable and the moisture content is also permanently reduced. The moisture content decreases to around 4-6 percent and does not react to changes in humidity drastically as untreated Timber. The cells of wood are modified and that caused changes in the wood characteristics. Resin is removed from the Timber and the process also decreases water absorption. The Timber has a life span of up to 30 years but this can be doubled by using a suitable Timber Treatment. The Timber will also fade over time due to UV exposure which is why we would also recommend using a suitable timber treatment. For example a UV Protection Oil. The Timber can be stained, painted or oiled. Double Gate Hinge Kit. 2 x Pairs 24 Black Cranked Hook and Band Hinges. 2 x 18 Galvanised Drop Bolts. These are only provided in Galvanised Finish due to the way the wear, but are place on the inside of the gates so will not be seen from the front. 1 x 6 Black Brenton Pad Bolt. 1 x 6 Black Ring Gate Latch. Please Note Screws and Bolts are Not Provided For Fitting. All of our products are wrapped in corrugated card with Foam corners and shrink wrapped for protection while in transport. All Orders will be delivered Monday to Friday as Standard. Saturday Deliveries can be arranged at an extra cost. If you are in urgent need for any of our items please give us a call. Please Take a Look in our Shop for Many other Styles and Products. We also offer all Designs in either Tanalised Timber or Cedar. We can now manufacture all of our timber products from. A Timber which has been through a. Thermal Modification Process, so no additional treatment needed. Thermowood is an environmentally and fully recyclable product. Please ask for a quote. The Timber can be stained or painted. If you would like any other Information or Advice on any of our Products. The item “WOODEN SWAN NECK DRIVEWAY GATES IN THERMOWOOD’WESTBURY’ + IRONMONGERY(dsingh05)” is in sale since Tuesday, June 8, 2021. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “ktpltd” and is located in Warminster. This item can be shipped to United Kingdom.
- Country/Region of Manufacture: United Kingdom
- Custom Bundle: No
- Material: Wood
- Type: Driveway Gate
- MPN: Does Not Apply
- Modified Item: No
- Non-Domestic Product: No
- Brand: Kinder Timber Products