Tag Archive for made2measure
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Tongue & Groove Arched 5ft
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Tongue & Groove Arched 5ft. Height: 4ft to 5ft Bespoke Custom Made To Measure Driveway Double Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] PLEASE ENSURE YOU ADD YOUR MEASUREMENTS CORRECTLY WHEN ORDERING Custom Height: We can Custom Make this between 120cm to 150cm. Custom Length: This is Optional please ensure you select the size above your required measurement. Please send us your measurements in mm as explained in the images on this listing. This is for a set of fully Made-to-measure driveway gates. When ordering measurements for height and total width in millimetres should be included with the order. Please ensure you choose the correct option that falls within your required sizes. When measuring for the driveway gates you should deduct 10mm on each side for the hinges and a further 10mm in the centre for the gates to close and open without catching. We can not be held responsible for measurements supplied incorrectly. (Normally within 6 to 12 hours from placing the order Monday to Friday). An approximate 20cm arch is crafted out of the top, which spans across both gates making the loining part of the two gates the centre of the arch and the true height of the gate. The tongue & groove boards used on the gate are smooth-planedtimber and are approx. 120mm wide and 12mm thick each, the boards are interlocked providing you with a smooth flat surface. Both gates are semi-braced framed using approximately 34mm x 70mm timber which has been smooth-planed. Horizontal frame bracing is top and bottom with a diagonal brace joining them together. Depending on the height and width an extra horizontal centre and diagonal bracing may be added to ensure you are provided with strong and sturdy gates. Supplied with either our 450mm Hinge & Ring Latch Kit. 6x 450mm Black Epoxy Coated T-Hinghes. 1x Black Epoxy Coated Ring Latch. 2x Black Epoxy Coated Brenton Pad Bolts. Enough Black screws to install kit fully. Or our 600mm Hinge & Ring Latch Kit. 6x 600mm Black Epoxy Coated T-Hinghes. Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather. Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected. We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry. Height: 4-5ft (120-150cm High) Bespoke Custom Made To Measure Driveway Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] Tongue & Groove Semi Braced Arch Top Gates (Pair) with Optional Hinge Packs. Handmade in our Telford Shropshire workshop these tongue & groove semi-braced arched top driveway gates provide a traditional feel to your entrances, adding a smooth flat surface, charm and character as well as privacy and protection. You can expect a high-quality finish and a set of gates that will last for many years to come. Our tongue & groove driveway gates are made from extremely durable with smooth-planed interlocking 120mm wide and 12mm thick tongue & groove boards and a sturdy 70mm x 34mm semi-bracing to ensure a lighter frame while offering a good solid structure. All parts of the gate have been treated using a tanalised pressure treatment to penetrate the wood and ensure long life and resistance to rot. We can deliver all items locally. We cover Telford, Shrewsbury, Bridgnorth and surrounding areas. Item(s) will be dispatched Monday through to Friday, we do not despatch items on a Saturday or Sunday. Iterms dispatch on a Friday will be delivered the following Monday / Tuesday. Your item(s) will arrive up to 24-48 hours after dispatch. Deliveries are made Monday to Friday weekend deliveries are location dependent. If your item(s) can be left safe or with a neighbour please advise at the time of your order. We offer a fast turn around service on most of our items (Delivered Monday to Friday only) sent out via the courier service. Premier Garden Supplies was established in 2013 with alot of hard work and dedication we have been lucky enough to have expanded our business each year. We are a small independent family run business based in Doseley, Telford where we have been trading from the start. Premier Garden Supplies believes that excellent customer service is key as well as keeping our prices as low as possible without compromising the quality of our products. We try our very best to help our customers old or new find exactly what they need. We supply the trade industry as well as the public with a wide selection of fencing and trellis panels, gates and fence posts. We manufacture all of our feather edge fence panels on site and also various different styles of trellis which are available in many different sizes. We also offer a custom sizing or made to measure fence panels (feather edge) gates and trellis service. We can supply concrete posts and concrete gravel boards, lap panels and we also stock a great selection of European style fencing, all available at very competitive prices. We can also supply other garden items such as pergolas, corner arbours, arbours, planters, bin stores and sleepers. Premier Garden Supplies LTD Terms and Conditions. By placing an order, you agree to our Terms and Conditions as set out below. Any drawings, descriptive matter or advertising produced by us and any descriptions or illustrations contained on our website are produced for the sole purpose of giving an approximate idea of the goods referred to in them. They shall not form part of the contract nor have any contractual force. A quotation for the goods given by us shall not constitute an offer. You will have an opportunity to check and correct any input errors in your order up until the point at which you place your order. For bespoke orders we will require your confirmation response in order to place your order into the manufacturing process. Once you have confirmed the sizes then this is the start point of your order. You may correct errors on your order up to the point at which you submit your order during the order process. It should be noted that if the order has entered the manufacturing process a correction will not be made. Where we accept your order, we have a legal duty to supply goods that are in conformity with these Terms and Conditions. All prices include the current applicable VAT rate unless otherwise stated. Prices quoted are applicable to the quantity specified and, on the information, provided by you at the time of order. Occasionally, an error may occur, and goods may be either incorrectly priced or described in which case we will not be obliged to supply the goods at the incorrect price or in accordance with the incorrect description or at all. We reserve the right to correct any errors from time to time. The description of the goods is set out in our quotation or confirmation of your order. We may supply goods in either metric or imperial sizes in the nearest equivalent measure and goods may be charged in metric if an allowance for conversion is needed. All descriptive matter, drawings, specifications, and advertising is published or issued for the purpose of giving an approximate idea of the described goods. They shall not form part of the contract and this shall not be a sale by sample. Each order will be considered a separate order and we are not able to guarantee that further orders for the same goods will match any previous order. In the event of special tolerances being required in the goods supplied beyond those generally accepted in the fencing trade, no liability will attach to us unless notified in writing to us at the time of your order and in return we acknowledge in writing that we are prepared to accept said order. Timber is natural organic material and will contain knots and sap, the timber may swell, shrink and/or warp which can cause splitting to occur. This is to be expected and is not a defect. Wood that has been pressure treated will shrink as the water used in the treatment process evaporates from the timber. It is very unusual for any of these natural weathering characteristics to be detrimental to the structural strength or shorten the life expectancy of the timber. We do not recommend using dark stains on gates as they attract heat which may cause additional movement in the timber. Website Photos and Images. All product Photographs and images are for illustration purpose only. The actual product may vary from the photo shown. Due to the treatment process the colour of softwood timber will vary in colour from the photos. Also, softwood timber will start off a shade of green depending on when it was treated, and then fade when in the sun. We cannot match softwood timber colour to existing timber. We will include tracking numbers for these orders. Items will be dispatched from us on a Monday through to Friday only, we do not dispatch any items on a Saturday or a Sunday. You should allow 48 hours from dispatch for your item to arrive. You may if necessary, instruct us to leave your items safe if you wish to do so at your own risk. We will not be held responsible if your items have been delivered/left safe for you and any issues arise from your instruction. However, this may not always be possible. We strongly suggest that you do not schedule or commence any installation work until after you have received your order and checked all the goods are suitable for your purposes and do not have any defects or missing parts. We shall not be held liable for any consequential loss. You may collect goods from us during our trading hours. If they are not collected within 7 days from when we notify you, they are available, a storage charge may at our discretion be charged. If you collect goods from us you are solely responsible for the size weight and positioning of the load on the vehicle and shall indemnify us in respect of all costs, claims, losses or expenses we may incur as a result of you collecting the goods. If the goods are to be deposited other than on your private property, you shall be responsible for compliance with all regulations, and for all steps which need to be taken for the protection always of the persons or property. You shall inspect the goods at the place and time of unloading or collection. Risk in the goods shall pass to you when the goods are delivered. The goods shall remain with us until you pay all sums due to us, whether in respect of this contract or otherwise. We shall be entitled, at any time, to recover any or all of the goods in your possession to which we have title and for that purpose, We, our employees or agents may, with such transport as is necessary, enter upon any premises occupied by you, or to which you have access and where goods may be, or believed to be situated. Faulty Products and Products Delivered Damaged. Please have your order number to hand as well as details of the affected product(s). We should be given reasonable opportunity after receiving notice to examine the products affected. We may ask you to provide photographs of any damage, defects or defective workmanship or material. You agree to not make any further use of such goods after giving such notice. The defect is not due to wilful damage, negligence (other than ours) fair wear and tear, alteration or repair of such goods without our prior written consent or incorrect storage, application, movement, installation, commissioning and the defect is not due to any act or omission of you, your agents or contractors. In the situation an item is faulty, not as described or delivered damaged, we will try and resolve the issue with one of the following options. We shall not be liable to you for any economic loss, loss of profit, or loss of business. In each case whether direct, indirect or consequential, or any other indirect losses whatsoever and howsoever caused. If we receive cancellation notice outside of these time frames, your consumer cancellation right will not apply. Please note if you exercise your consumer cancellation rights after the products have been dispatched, you will be responsible for returning products to us at your own cost and within 14 days of cancelling your order. Certain goods supplied by us could, if used incorrectly, give rise to risks to health and safety. Information in respect of such goods is available from us. You will be responsible for the disposal of any waste arising from the products and will apply with applicable regulations, laws and waste management licences relating to such waste. LAST UPDATED: October 2022. UNIQUE TO PREMIER GARDEN SUPPLIES.
Category: driveway / Tags: arched, bespoke, driveway, gates, groove, made2measure, semi-braced, tongue
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Tongue & Groove Arched 6ft
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Tongue & Groove Arched 6ft. Height: 5ft to 6ft Bespoke Custom Made To Measure Driveway Double Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] PLEASE ENSURE YOU ADD YOUR MEASUREMENTS CORRECTLY WHEN ORDERING Custom Height: We can Custom Make this between 150cm to 180cm. Custom Length: This is Optional please ensure you select the size above your required measurement. Please send us your measurements in mm as explained in the images on this listing. This is for a set of fully Made-to-measure driveway gates. When ordering measurements for height and total width in millimetres should be included with the order. Please ensure you choose the correct option that falls within your required sizes. When measuring for the driveway gates you should deduct 10mm on each side for the hinges and a further 10mm in the centre for the gates to close and open without catching. We can not be held responsible for measurements supplied incorrectly. (Normally within 6 to 12 hours from placing the order Monday to Friday). An approximate 20cm arch is crafted out of the top, which spans across both gates making the loining part of the two gates the centre of the arch and the true height of the gate. The tongue & groove boards used on the gate are smooth-planedtimber and are approx. 120mm wide and 12mm thick each, the boards are interlocked providing you with a smooth flat surface. Both gates are semi-braced framed using approximately 34mm x 70mm timber which has been smooth-planed. Horizontal frame bracing is top and bottom with a diagonal brace joining them together. Depending on the height and width an extra horizontal centre and diagonal bracing may be added to ensure you are provided with strong and sturdy gates. Supplied with either our 450mm Hinge & Ring Latch Kit. 6x 450mm Black Epoxy Coated T-Hinghes. 1x Black Epoxy Coated Ring Latch. 2x Black Epoxy Coated Brenton Pad Bolts. Enough Black screws to install kit fully. Or our 600mm Hinge & Ring Latch Kit. 6x 600mm Black Epoxy Coated T-Hinghes. Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather. Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected. We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry. Height: 5-6ft (150-180cm High) Bespoke Custom Made To Measure Driveway Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] Tongue & Groove Semi Braced Arch Top Gates (Pair) with Optional Hinge Packs. Handmade in our Telford Shropshire workshop these tongue & groove semi-braced arched top driveway gates provide a traditional feel to your entrances, adding a smooth flat surface, charm and character as well as privacy and protection. You can expect a high-quality finish and a set of gates that will last for many years to come. Our tongue & groove driveway gates are made from extremely durable with smooth-planed interlocking 120mm wide and 12mm thick tongue & groove boards and a sturdy 70mm x 34mm semi-bracing to ensure a lighter frame while offering a good solid structure. All parts of the gate have been treated using a tanalised pressure treatment to penetrate the wood and ensure long life and resistance to rot. We can deliver all items locally. We cover Telford, Shrewsbury, Bridgnorth and surrounding areas. Item(s) will be dispatched Monday through to Friday, we do not despatch items on a Saturday or Sunday. Iterms dispatch on a Friday will be delivered the following Monday / Tuesday. Your item(s) will arrive up to 24-48 hours after dispatch. Deliveries are made Monday to Friday weekend deliveries are location dependent. If your item(s) can be left safe or with a neighbour please advise at the time of your order. We offer a fast turn around service on most of our items (Delivered Monday to Friday only) sent out via the courier service. Premier Garden Supplies was established in 2013 with alot of hard work and dedication we have been lucky enough to have expanded our business each year. We are a small independent family run business based in Doseley, Telford where we have been trading from the start. Premier Garden Supplies believes that excellent customer service is key as well as keeping our prices as low as possible without compromising the quality of our products. We try our very best to help our customers old or new find exactly what they need. We supply the trade industry as well as the public with a wide selection of fencing and trellis panels, gates and fence posts. We manufacture all of our feather edge fence panels on site and also various different styles of trellis which are available in many different sizes. We also offer a custom sizing or made to measure fence panels (feather edge) gates and trellis service. We can supply concrete posts and concrete gravel boards, lap panels and we also stock a great selection of European style fencing, all available at very competitive prices. We can also supply other garden items such as pergolas, corner arbours, arbours, planters, bin stores and sleepers. Premier Garden Supplies LTD Terms and Conditions. By placing an order, you agree to our Terms and Conditions as set out below. Any drawings, descriptive matter or advertising produced by us and any descriptions or illustrations contained on our website are produced for the sole purpose of giving an approximate idea of the goods referred to in them. They shall not form part of the contract nor have any contractual force. A quotation for the goods given by us shall not constitute an offer. You will have an opportunity to check and correct any input errors in your order up until the point at which you place your order. For bespoke orders we will require your confirmation response in order to place your order into the manufacturing process. Once you have confirmed the sizes then this is the start point of your order. You may correct errors on your order up to the point at which you submit your order during the order process. It should be noted that if the order has entered the manufacturing process a correction will not be made. Where we accept your order, we have a legal duty to supply goods that are in conformity with these Terms and Conditions. All prices include the current applicable VAT rate unless otherwise stated. Prices quoted are applicable to the quantity specified and, on the information, provided by you at the time of order. Occasionally, an error may occur, and goods may be either incorrectly priced or described in which case we will not be obliged to supply the goods at the incorrect price or in accordance with the incorrect description or at all. We reserve the right to correct any errors from time to time. The description of the goods is set out in our quotation or confirmation of your order. We may supply goods in either metric or imperial sizes in the nearest equivalent measure and goods may be charged in metric if an allowance for conversion is needed. All descriptive matter, drawings, specifications, and advertising is published or issued for the purpose of giving an approximate idea of the described goods. They shall not form part of the contract and this shall not be a sale by sample. Each order will be considered a separate order and we are not able to guarantee that further orders for the same goods will match any previous order. In the event of special tolerances being required in the goods supplied beyond those generally accepted in the fencing trade, no liability will attach to us unless notified in writing to us at the time of your order and in return we acknowledge in writing that we are prepared to accept said order. Timber is natural organic material and will contain knots and sap, the timber may swell, shrink and/or warp which can cause splitting to occur. This is to be expected and is not a defect. Wood that has been pressure treated will shrink as the water used in the treatment process evaporates from the timber. It is very unusual for any of these natural weathering characteristics to be detrimental to the structural strength or shorten the life expectancy of the timber. We do not recommend using dark stains on gates as they attract heat which may cause additional movement in the timber. Website Photos and Images. All product Photographs and images are for illustration purpose only. The actual product may vary from the photo shown. Due to the treatment process the colour of softwood timber will vary in colour from the photos. Also, softwood timber will start off a shade of green depending on when it was treated, and then fade when in the sun. We cannot match softwood timber colour to existing timber. We will include tracking numbers for these orders. Items will be dispatched from us on a Monday through to Friday only, we do not dispatch any items on a Saturday or a Sunday. You should allow 48 hours from dispatch for your item to arrive. You may if necessary, instruct us to leave your items safe if you wish to do so at your own risk. We will not be held responsible if your items have been delivered/left safe for you and any issues arise from your instruction. However, this may not always be possible. We strongly suggest that you do not schedule or commence any installation work until after you have received your order and checked all the goods are suitable for your purposes and do not have any defects or missing parts. We shall not be held liable for any consequential loss. You may collect goods from us during our trading hours. If they are not collected within 7 days from when we notify you, they are available, a storage charge may at our discretion be charged. If you collect goods from us you are solely responsible for the size weight and positioning of the load on the vehicle and shall indemnify us in respect of all costs, claims, losses or expenses we may incur as a result of you collecting the goods. If the goods are to be deposited other than on your private property, you shall be responsible for compliance with all regulations, and for all steps which need to be taken for the protection always of the persons or property. You shall inspect the goods at the place and time of unloading or collection. Risk in the goods shall pass to you when the goods are delivered. The goods shall remain with us until you pay all sums due to us, whether in respect of this contract or otherwise. We shall be entitled, at any time, to recover any or all of the goods in your possession to which we have title and for that purpose, We, our employees or agents may, with such transport as is necessary, enter upon any premises occupied by you, or to which you have access and where goods may be, or believed to be situated. Faulty Products and Products Delivered Damaged. Please have your order number to hand as well as details of the affected product(s). We should be given reasonable opportunity after receiving notice to examine the products affected. We may ask you to provide photographs of any damage, defects or defective workmanship or material. You agree to not make any further use of such goods after giving such notice. The defect is not due to wilful damage, negligence (other than ours) fair wear and tear, alteration or repair of such goods without our prior written consent or incorrect storage, application, movement, installation, commissioning and the defect is not due to any act or omission of you, your agents or contractors. In the situation an item is faulty, not as described or delivered damaged, we will try and resolve the issue with one of the following options. We shall not be liable to you for any economic loss, loss of profit, or loss of business. In each case whether direct, indirect or consequential, or any other indirect losses whatsoever and howsoever caused. If we receive cancellation notice outside of these time frames, your consumer cancellation right will not apply. Please note if you exercise your consumer cancellation rights after the products have been dispatched, you will be responsible for returning products to us at your own cost and within 14 days of cancelling your order. Certain goods supplied by us could, if used incorrectly, give rise to risks to health and safety. Information in respect of such goods is available from us. You will be responsible for the disposal of any waste arising from the products and will apply with applicable regulations, laws and waste management licences relating to such waste. LAST UPDATED: October 2022. UNIQUE TO PREMIER GARDEN SUPPLIES.
Category: driveway / Tags: arched, bespoke, driveway, gates, groove, made2measure, semi-braced, tongue
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Tongue & Groove Arched 4ft
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Tongue & Groove Arched 4ft. Height: 3ft to 4ft Bespoke Custom Made To Measure Driveway Double Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] PLEASE ENSURE YOU ADD YOUR MEASUREMENTS CORRECTLY WHEN ORDERING Custom Height: We can Custom Make this between 90cm to 120cm. Custom Length: This is Optional please ensure you select the size above your required measurement. Please send us your measurements in mm as explained in the images on this listing. This is for a set of fully Made-to-measure driveway gates. When ordering measurements for height and total width in millimetres should be included with the order. Please ensure you choose the correct option that falls within your required sizes. When measuring for the driveway gates you should deduct 10mm on each side for the hinges and a further 10mm in the centre for the gates to close and open without catching. We can not be held responsible for measurements supplied incorrectly. (Normally within 6 to 12 hours from placing the order Monday to Friday). An approximate 20cm arch is crafted out of the top, which spans across both gates making the loining part of the two gates the centre of the arch and the true height of the gate. The tongue & groove boards used on the gate are smooth-planedtimber and are approx. 120mm wide and 12mm thick each, the boards are interlocked providing you with a smooth flat surface. Both gates are semi-braced framed using approximately 34mm x 70mm timber which has been smooth-planed. Horizontal frame bracing is top and bottom with a diagonal brace joining them together. Depending on the height and width an extra horizontal centre and diagonal bracing may be added to ensure you are provided with strong and sturdy gates. Supplied with either our 450mm Hinge & Ring Latch Kit. 6x 450mm Black Epoxy Coated T-Hinghes. 1x Black Epoxy Coated Ring Latch. 2x Black Epoxy Coated Brenton Pad Bolts. Enough Black screws to install kit fully. Or our 600mm Hinge & Ring Latch Kit. 6x 600mm Black Epoxy Coated T-Hinghes. Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather. Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected. We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry. Height: 3-4ft (90-120cm High) Bespoke Custom Made To Measure Driveway Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] Tongue & Groove Semi Braced Arch Top Gates (Pair) with Optional Hinge Packs. Handmade in our Telford Shropshire workshop these tongue & groove semi-braced arched top driveway gates provide a traditional feel to your entrances, adding a smooth flat surface, charm and character as well as privacy and protection. You can expect a high-quality finish and a set of gates that will last for many years to come. Our tongue & groove driveway gates are made from extremely durable with smooth-planed interlocking 120mm wide and 12mm thick tongue & groove boards and a sturdy 70mm x 34mm semi-bracing to ensure a lighter frame while offering a good solid structure. All parts of the gate have been treated using a tanalised pressure treatment to penetrate the wood and ensure long life and resistance to rot. We can deliver all items locally. We cover Telford, Shrewsbury, Bridgnorth and surrounding areas. Item(s) will be dispatched Monday through to Friday, we do not despatch items on a Saturday or Sunday. Iterms dispatch on a Friday will be delivered the following Monday / Tuesday. Your item(s) will arrive up to 24-48 hours after dispatch. Deliveries are made Monday to Friday weekend deliveries are location dependent. If your item(s) can be left safe or with a neighbour please advise at the time of your order. We offer a fast turn around service on most of our items (Delivered Monday to Friday only) sent out via the courier service. Premier Garden Supplies was established in 2013 with alot of hard work and dedication we have been lucky enough to have expanded our business each year. We are a small independent family run business based in Doseley, Telford where we have been trading from the start. Premier Garden Supplies believes that excellent customer service is key as well as keeping our prices as low as possible without compromising the quality of our products. We try our very best to help our customers old or new find exactly what they need. We supply the trade industry as well as the public with a wide selection of fencing and trellis panels, gates and fence posts. We manufacture all of our feather edge fence panels on site and also various different styles of trellis which are available in many different sizes. We also offer a custom sizing or made to measure fence panels (feather edge) gates and trellis service. We can supply concrete posts and concrete gravel boards, lap panels and we also stock a great selection of European style fencing, all available at very competitive prices. We can also supply other garden items such as pergolas, corner arbours, arbours, planters, bin stores and sleepers. Premier Garden Supplies LTD Terms and Conditions. By placing an order, you agree to our Terms and Conditions as set out below. Any drawings, descriptive matter or advertising produced by us and any descriptions or illustrations contained on our website are produced for the sole purpose of giving an approximate idea of the goods referred to in them. They shall not form part of the contract nor have any contractual force. A quotation for the goods given by us shall not constitute an offer. You will have an opportunity to check and correct any input errors in your order up until the point at which you place your order. For bespoke orders we will require your confirmation response in order to place your order into the manufacturing process. Once you have confirmed the sizes then this is the start point of your order. You may correct errors on your order up to the point at which you submit your order during the order process. It should be noted that if the order has entered the manufacturing process a correction will not be made. Where we accept your order, we have a legal duty to supply goods that are in conformity with these Terms and Conditions. All prices include the current applicable VAT rate unless otherwise stated. Prices quoted are applicable to the quantity specified and, on the information, provided by you at the time of order. Occasionally, an error may occur, and goods may be either incorrectly priced or described in which case we will not be obliged to supply the goods at the incorrect price or in accordance with the incorrect description or at all. We reserve the right to correct any errors from time to time. The description of the goods is set out in our quotation or confirmation of your order. We may supply goods in either metric or imperial sizes in the nearest equivalent measure and goods may be charged in metric if an allowance for conversion is needed. All descriptive matter, drawings, specifications, and advertising is published or issued for the purpose of giving an approximate idea of the described goods. They shall not form part of the contract and this shall not be a sale by sample. Each order will be considered a separate order and we are not able to guarantee that further orders for the same goods will match any previous order. In the event of special tolerances being required in the goods supplied beyond those generally accepted in the fencing trade, no liability will attach to us unless notified in writing to us at the time of your order and in return we acknowledge in writing that we are prepared to accept said order. Timber is natural organic material and will contain knots and sap, the timber may swell, shrink and/or warp which can cause splitting to occur. This is to be expected and is not a defect. Wood that has been pressure treated will shrink as the water used in the treatment process evaporates from the timber. It is very unusual for any of these natural weathering characteristics to be detrimental to the structural strength or shorten the life expectancy of the timber. We do not recommend using dark stains on gates as they attract heat which may cause additional movement in the timber. Website Photos and Images. All product Photographs and images are for illustration purpose only. The actual product may vary from the photo shown. Due to the treatment process the colour of softwood timber will vary in colour from the photos. Also, softwood timber will start off a shade of green depending on when it was treated, and then fade when in the sun. We cannot match softwood timber colour to existing timber. We will include tracking numbers for these orders. Items will be dispatched from us on a Monday through to Friday only, we do not dispatch any items on a Saturday or a Sunday. You should allow 48 hours from dispatch for your item to arrive. You may if necessary, instruct us to leave your items safe if you wish to do so at your own risk. We will not be held responsible if your items have been delivered/left safe for you and any issues arise from your instruction. However, this may not always be possible. We strongly suggest that you do not schedule or commence any installation work until after you have received your order and checked all the goods are suitable for your purposes and do not have any defects or missing parts. We shall not be held liable for any consequential loss. You may collect goods from us during our trading hours. If they are not collected within 7 days from when we notify you, they are available, a storage charge may at our discretion be charged. If you collect goods from us you are solely responsible for the size weight and positioning of the load on the vehicle and shall indemnify us in respect of all costs, claims, losses or expenses we may incur as a result of you collecting the goods. If the goods are to be deposited other than on your private property, you shall be responsible for compliance with all regulations, and for all steps which need to be taken for the protection always of the persons or property. You shall inspect the goods at the place and time of unloading or collection. Risk in the goods shall pass to you when the goods are delivered. The goods shall remain with us until you pay all sums due to us, whether in respect of this contract or otherwise. We shall be entitled, at any time, to recover any or all of the goods in your possession to which we have title and for that purpose, We, our employees or agents may, with such transport as is necessary, enter upon any premises occupied by you, or to which you have access and where goods may be, or believed to be situated. Faulty Products and Products Delivered Damaged. Please have your order number to hand as well as details of the affected product(s). We should be given reasonable opportunity after receiving notice to examine the products affected. We may ask you to provide photographs of any damage, defects or defective workmanship or material. You agree to not make any further use of such goods after giving such notice. The defect is not due to wilful damage, negligence (other than ours) fair wear and tear, alteration or repair of such goods without our prior written consent or incorrect storage, application, movement, installation, commissioning and the defect is not due to any act or omission of you, your agents or contractors. In the situation an item is faulty, not as described or delivered damaged, we will try and resolve the issue with one of the following options. We shall not be liable to you for any economic loss, loss of profit, or loss of business. In each case whether direct, indirect or consequential, or any other indirect losses whatsoever and howsoever caused. If we receive cancellation notice outside of these time frames, your consumer cancellation right will not apply. Please note if you exercise your consumer cancellation rights after the products have been dispatched, you will be responsible for returning products to us at your own cost and within 14 days of cancelling your order. Certain goods supplied by us could, if used incorrectly, give rise to risks to health and safety. Information in respect of such goods is available from us. You will be responsible for the disposal of any waste arising from the products and will apply with applicable regulations, laws and waste management licences relating to such waste. LAST UPDATED: October 2022. UNIQUE TO PREMIER GARDEN SUPPLIES.
Category: driveway / Tags: arched, bespoke, driveway, gates, groove, made2measure, semi-braced, tongue
PGS Driveway Gates BESPOKE Made2Measure Fully Framed Feather Edge Arched 5ft
PGS Driveway Gates BESPOKE Made2Measure Fully Framed Feather Edge Arched 5ft. Height: 4ft to 5ft Bespoke Custom Made To Measure Driveway Double Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] PLEASE ENSURE YOU ADD YOUR MEASUREMENTS CORRECTLY WHEN ORDERING Custom Height: We can Custom Make this between 120cm to 150cm. Custom Length: This is Optional please ensure you select the size above your required measurement. Please send us your measurements in mm as explained in the images on this listing. This is for a set of fully Made-to-measure driveway gates. When ordering measurements for height and total width in millimetres should be included with the order. Please ensure you choose the correct option that falls within your required sizes. When measuring for the driveway gates you should deduct 10mm on each side for the hinges and a further 10mm in the centre for the gates to close and open without catching. We can not be held responsible for measurements supplied incorrectly. (Normally within 6 to 12 hours from placing the order Monday to Friday). An approximate 20cm arch is crafted out of the top, which spans across both gates making the loining part of the two gates the centre of the arch and the true height of the gate. The feather edge boards used on the gate are rough sawn timber and are approx. 125mm wide with a 15mm thick edge each, these are positioned overlapping to form a closeboard effect. Both gates are fully framed using approximately 34mm x 70mm timber which has been smooth-planed. A full perimeter frame on each gate along with a diagonal brace. Depending on the height and width extra centre and diagonal bracing may be added to ensure ultimate strong and sturdy gates. Supplied with either our 450mm Hinge & Ring Latch Kit. 6x 450mm Black Epoxy Coated T-Hinghes. 1x Black Epoxy Coated Ring Latch. 2x Black Epoxy Coated Brenton Pad Bolts. Enough Black screws to install kit fully. Or our 600mm Hinge & Ring Latch Kit. 6x 600mm Black Epoxy Coated T-Hinghes. Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather. Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected. We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry. Height: 4-5ft (120-150cm High) Bespoke Custom Made to Measure Driveway Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] Fefther Edge Fully Framed Arch Top Gates (Pair) with Optional Hinge Packs. Handmade in our Telford Shropshire workshop these feather edge fully framed arched top driveway gates provide a traditional feel to your entrances, adding charm and character as well as privacy and protection. You can expect a high-quality finish and a set of gates that will last for many years to come. Our Feather edge driveway gates are made from extremely durable with rough-sawn overlapping 125mm wide and 15mm thick feather edge boards and heavy-duty 70mm x 34mm fully framed bracing to ensure a good solid structure is formed. All parts of the gate have been treated using a tanalised pressure treatment to penetrate the wood and ensure long life and resistance to rot. We can deliver all items locally. We cover Telford, Shrewsbury, Bridgnorth and surrounding areas. Item(s) will be dispatched Monday through to Friday, we do not despatch items on a Saturday or Sunday. Iterms dispatch on a Friday will be delivered the following Monday / Tuesday. Your item(s) will arrive up to 24-48 hours after dispatch. Deliveries are made Monday to Friday weekend deliveries are location dependent. If your item(s) can be left safe or with a neighbour please advise at the time of your order. We offer a fast turn around service on most of our items (Delivered Monday to Friday only) sent out via the courier service. Premier Garden Supplies was established in 2013 with alot of hard work and dedication we have been lucky enough to have expanded our business each year. We are a small independent family run business based in Doseley, Telford where we have been trading from the start. Premier Garden Supplies believes that excellent customer service is key as well as keeping our prices as low as possible without compromising the quality of our products. We try our very best to help our customers old or new find exactly what they need. We supply the trade industry as well as the public with a wide selection of fencing and trellis panels, gates and fence posts. We manufacture all of our feather edge fence panels on site and also various different styles of trellis which are available in many different sizes. We also offer a custom sizing or made to measure fence panels (feather edge) gates and trellis service. We can supply concrete posts and concrete gravel boards, lap panels and we also stock a great selection of European style fencing, all available at very competitive prices. We can also supply other garden items such as pergolas, corner arbours, arbours, planters, bin stores and sleepers. Premier Garden Supplies LTD Terms and Conditions. By placing an order, you agree to our Terms and Conditions as set out below. Any drawings, descriptive matter or advertising produced by us and any descriptions or illustrations contained on our website are produced for the sole purpose of giving an approximate idea of the goods referred to in them. They shall not form part of the contract nor have any contractual force. A quotation for the goods given by us shall not constitute an offer. You will have an opportunity to check and correct any input errors in your order up until the point at which you place your order. For bespoke orders we will require your confirmation response in order to place your order into the manufacturing process. Once you have confirmed the sizes then this is the start point of your order. You may correct errors on your order up to the point at which you submit your order during the order process. It should be noted that if the order has entered the manufacturing process a correction will not be made. Where we accept your order, we have a legal duty to supply goods that are in conformity with these Terms and Conditions. All prices include the current applicable VAT rate unless otherwise stated. Prices quoted are applicable to the quantity specified and, on the information, provided by you at the time of order. Occasionally, an error may occur, and goods may be either incorrectly priced or described in which case we will not be obliged to supply the goods at the incorrect price or in accordance with the incorrect description or at all. We reserve the right to correct any errors from time to time. The description of the goods is set out in our quotation or confirmation of your order. We may supply goods in either metric or imperial sizes in the nearest equivalent measure and goods may be charged in metric if an allowance for conversion is needed. All descriptive matter, drawings, specifications, and advertising is published or issued for the purpose of giving an approximate idea of the described goods. They shall not form part of the contract and this shall not be a sale by sample. Each order will be considered a separate order and we are not able to guarantee that further orders for the same goods will match any previous order. In the event of special tolerances being required in the goods supplied beyond those generally accepted in the fencing trade, no liability will attach to us unless notified in writing to us at the time of your order and in return we acknowledge in writing that we are prepared to accept said order. Timber is natural organic material and will contain knots and sap, the timber may swell, shrink and/or warp which can cause splitting to occur. This is to be expected and is not a defect. Wood that has been pressure treated will shrink as the water used in the treatment process evaporates from the timber. It is very unusual for any of these natural weathering characteristics to be detrimental to the structural strength or shorten the life expectancy of the timber. We do not recommend using dark stains on gates as they attract heat which may cause additional movement in the timber. Website Photos and Images. All product Photographs and images are for illustration purpose only. The actual product may vary from the photo shown. Due to the treatment process the colour of softwood timber will vary in colour from the photos. Also, softwood timber will start off a shade of green depending on when it was treated, and then fade when in the sun. We cannot match softwood timber colour to existing timber. We will include tracking numbers for these orders. Items will be dispatched from us on a Monday through to Friday only, we do not dispatch any items on a Saturday or a Sunday. You should allow 48 hours from dispatch for your item to arrive. You may if necessary, instruct us to leave your items safe if you wish to do so at your own risk. We will not be held responsible if your items have been delivered/left safe for you and any issues arise from your instruction. However, this may not always be possible. We strongly suggest that you do not schedule or commence any installation work until after you have received your order and checked all the goods are suitable for your purposes and do not have any defects or missing parts. We shall not be held liable for any consequential loss. You may collect goods from us during our trading hours. If they are not collected within 7 days from when we notify you, they are available, a storage charge may at our discretion be charged. If you collect goods from us you are solely responsible for the size weight and positioning of the load on the vehicle and shall indemnify us in respect of all costs, claims, losses or expenses we may incur as a result of you collecting the goods. If the goods are to be deposited other than on your private property, you shall be responsible for compliance with all regulations, and for all steps which need to be taken for the protection always of the persons or property. You shall inspect the goods at the place and time of unloading or collection. Risk in the goods shall pass to you when the goods are delivered. The goods shall remain with us until you pay all sums due to us, whether in respect of this contract or otherwise. We shall be entitled, at any time, to recover any or all of the goods in your possession to which we have title and for that purpose, We, our employees or agents may, with such transport as is necessary, enter upon any premises occupied by you, or to which you have access and where goods may be, or believed to be situated. Faulty Products and Products Delivered Damaged. Please have your order number to hand as well as details of the affected product(s). We should be given reasonable opportunity after receiving notice to examine the products affected. We may ask you to provide photographs of any damage, defects or defective workmanship or material. You agree to not make any further use of such goods after giving such notice. The defect is not due to wilful damage, negligence (other than ours) fair wear and tear, alteration or repair of such goods without our prior written consent or incorrect storage, application, movement, installation, commissioning and the defect is not due to any act or omission of you, your agents or contractors. In the situation an item is faulty, not as described or delivered damaged, we will try and resolve the issue with one of the following options. We shall not be liable to you for any economic loss, loss of profit, or loss of business. In each case whether direct, indirect or consequential, or any other indirect losses whatsoever and howsoever caused. If we receive cancellation notice outside of these time frames, your consumer cancellation right will not apply. Please note if you exercise your consumer cancellation rights after the products have been dispatched, you will be responsible for returning products to us at your own cost and within 14 days of cancelling your order. Certain goods supplied by us could, if used incorrectly, give rise to risks to health and safety. Information in respect of such goods is available from us. You will be responsible for the disposal of any waste arising from the products and will apply with applicable regulations, laws and waste management licences relating to such waste. LAST UPDATED: October 2022. UNIQUE TO PREMIER GARDEN SUPPLIES.
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Feather Edge Arched 4ft
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Feather Edge Arched 4ft. Height: 3ft to 4ft Bespoke Custom Made To Measure Driveway Double Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] PLEASE ENSURE YOU ADD YOUR MEASUREMENTS CORRECTLY WHEN ORDERING Custom Height: We can Custom Make this between 90cm to 120cm. Custom Length: This is Optional please ensure you select the size above your required measurement. Please send us your measurements in mm as explained in the images on this listing. This is for a set of fully Made-to-measure driveway gates. When ordering measurements for height and total width in millimetres should be included with the order. Please ensure you choose the correct option that falls within your required sizes. When measuring for the driveway gates you should deduct 10mm on each side for the hinges and a further 10mm in the centre for the gates to close and open without catching. We can not be held responsible for measurements supplied incorrectly. (Normally within 6 to 12 hours from placing the order Monday to Friday). An approximate 20cm arch is crafted out of the top, which spans across both gates making the loining part of the two gates the centre of the arch and the true height of the gate. The feather edge boards used on the gate are rough sawn timber and are approx. 125mm wide with a 15mm thick edge each, these are positioned overlapping to form a closeboard effect. Both gates are semi-braced framed using approximately 34mm x 70mm timber which has been smooth-planed. Horizontal frame bracing is top and bottom with a diagonal brace joining them together. Depending on the height and width an extra horizontal centre and diagonal bracing may be added to ensure you are provided with strong and sturdy gates. Supplied with either our 450mm Hinge & Ring Latch Kit. 6x 450mm Black Epoxy Coated T-Hinghes. 1x Black Epoxy Coated Ring Latch. 2x Black Epoxy Coated Brenton Pad Bolts. Enough Black screws to install kit fully. Or our 600mm Hinge & Ring Latch Kit. 6x 600mm Black Epoxy Coated T-Hinghes. Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather. Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected. We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry. Height: 3-4ft (90-120cm High) Bespoke Custom Made To Measure Driveway Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] Fefther Edge Semi Braced Arch Top Gates (Pair) with Optional Hinge Packs. Handmade in our Telford Shropshire workshop these feather edge semi-braced arched top driveway gates provide a traditional feel to your entrances, adding charm and character as well as privacy and protection. You can expect a high-quality finish and a set of gates that will last for many years to come. Our Feather edge driveway gates are made from extremely durable with rough-sawn overlapping 125mm wide and 15mm thick feather edge boards and a sturdy 70mm x 34mm semi-bracing to ensure a lighter frame while offering a good solid structure. All parts of the gate have been treated using a tanalised pressure treatment to penetrate the wood and ensure long life and resistance to rot. We can deliver all items locally. We cover Telford, Shrewsbury, Bridgnorth and surrounding areas. Item(s) will be dispatched Monday through to Friday, we do not despatch items on a Saturday or Sunday. Iterms dispatch on a Friday will be delivered the following Monday / Tuesday. Your item(s) will arrive up to 24-48 hours after dispatch. Deliveries are made Monday to Friday weekend deliveries are location dependent. If your item(s) can be left safe or with a neighbour please advise at the time of your order. We offer a fast turn around service on most of our items (Delivered Monday to Friday only) sent out via the courier service. Premier Garden Supplies was established in 2013 with alot of hard work and dedication we have been lucky enough to have expanded our business each year. We are a small independent family run business based in Doseley, Telford where we have been trading from the start. Premier Garden Supplies believes that excellent customer service is key as well as keeping our prices as low as possible without compromising the quality of our products. We try our very best to help our customers old or new find exactly what they need. We supply the trade industry as well as the public with a wide selection of fencing and trellis panels, gates and fence posts. We manufacture all of our feather edge fence panels on site and also various different styles of trellis which are available in many different sizes. We also offer a custom sizing or made to measure fence panels (feather edge) gates and trellis service. We can supply concrete posts and concrete gravel boards, lap panels and we also stock a great selection of European style fencing, all available at very competitive prices. We can also supply other garden items such as pergolas, corner arbours, arbours, planters, bin stores and sleepers. Premier Garden Supplies LTD Terms and Conditions. By placing an order, you agree to our Terms and Conditions as set out below. Any drawings, descriptive matter or advertising produced by us and any descriptions or illustrations contained on our website are produced for the sole purpose of giving an approximate idea of the goods referred to in them. They shall not form part of the contract nor have any contractual force. A quotation for the goods given by us shall not constitute an offer. You will have an opportunity to check and correct any input errors in your order up until the point at which you place your order. For bespoke orders we will require your confirmation response in order to place your order into the manufacturing process. Once you have confirmed the sizes then this is the start point of your order. You may correct errors on your order up to the point at which you submit your order during the order process. It should be noted that if the order has entered the manufacturing process a correction will not be made. Where we accept your order, we have a legal duty to supply goods that are in conformity with these Terms and Conditions. All prices include the current applicable VAT rate unless otherwise stated. Prices quoted are applicable to the quantity specified and, on the information, provided by you at the time of order. Occasionally, an error may occur, and goods may be either incorrectly priced or described in which case we will not be obliged to supply the goods at the incorrect price or in accordance with the incorrect description or at all. We reserve the right to correct any errors from time to time. The description of the goods is set out in our quotation or confirmation of your order. We may supply goods in either metric or imperial sizes in the nearest equivalent measure and goods may be charged in metric if an allowance for conversion is needed. All descriptive matter, drawings, specifications, and advertising is published or issued for the purpose of giving an approximate idea of the described goods. They shall not form part of the contract and this shall not be a sale by sample. Each order will be considered a separate order and we are not able to guarantee that further orders for the same goods will match any previous order. In the event of special tolerances being required in the goods supplied beyond those generally accepted in the fencing trade, no liability will attach to us unless notified in writing to us at the time of your order and in return we acknowledge in writing that we are prepared to accept said order. Timber is natural organic material and will contain knots and sap, the timber may swell, shrink and/or warp which can cause splitting to occur. This is to be expected and is not a defect. Wood that has been pressure treated will shrink as the water used in the treatment process evaporates from the timber. It is very unusual for any of these natural weathering characteristics to be detrimental to the structural strength or shorten the life expectancy of the timber. We do not recommend using dark stains on gates as they attract heat which may cause additional movement in the timber. Website Photos and Images. All product Photographs and images are for illustration purpose only. The actual product may vary from the photo shown. Due to the treatment process the colour of softwood timber will vary in colour from the photos. Also, softwood timber will start off a shade of green depending on when it was treated, and then fade when in the sun. We cannot match softwood timber colour to existing timber. We will include tracking numbers for these orders. Items will be dispatched from us on a Monday through to Friday only, we do not dispatch any items on a Saturday or a Sunday. You should allow 48 hours from dispatch for your item to arrive. You may if necessary, instruct us to leave your items safe if you wish to do so at your own risk. We will not be held responsible if your items have been delivered/left safe for you and any issues arise from your instruction. However, this may not always be possible. We strongly suggest that you do not schedule or commence any installation work until after you have received your order and checked all the goods are suitable for your purposes and do not have any defects or missing parts. We shall not be held liable for any consequential loss. You may collect goods from us during our trading hours. If they are not collected within 7 days from when we notify you, they are available, a storage charge may at our discretion be charged. If you collect goods from us you are solely responsible for the size weight and positioning of the load on the vehicle and shall indemnify us in respect of all costs, claims, losses or expenses we may incur as a result of you collecting the goods. If the goods are to be deposited other than on your private property, you shall be responsible for compliance with all regulations, and for all steps which need to be taken for the protection always of the persons or property. You shall inspect the goods at the place and time of unloading or collection. Risk in the goods shall pass to you when the goods are delivered. The goods shall remain with us until you pay all sums due to us, whether in respect of this contract or otherwise. We shall be entitled, at any time, to recover any or all of the goods in your possession to which we have title and for that purpose, We, our employees or agents may, with such transport as is necessary, enter upon any premises occupied by you, or to which you have access and where goods may be, or believed to be situated. Faulty Products and Products Delivered Damaged. Please have your order number to hand as well as details of the affected product(s). We should be given reasonable opportunity after receiving notice to examine the products affected. We may ask you to provide photographs of any damage, defects or defective workmanship or material. You agree to not make any further use of such goods after giving such notice. The defect is not due to wilful damage, negligence (other than ours) fair wear and tear, alteration or repair of such goods without our prior written consent or incorrect storage, application, movement, installation, commissioning and the defect is not due to any act or omission of you, your agents or contractors. In the situation an item is faulty, not as described or delivered damaged, we will try and resolve the issue with one of the following options. We shall not be liable to you for any economic loss, loss of profit, or loss of business. In each case whether direct, indirect or consequential, or any other indirect losses whatsoever and howsoever caused. If we receive cancellation notice outside of these time frames, your consumer cancellation right will not apply. Please note if you exercise your consumer cancellation rights after the products have been dispatched, you will be responsible for returning products to us at your own cost and within 14 days of cancelling your order. Certain goods supplied by us could, if used incorrectly, give rise to risks to health and safety. Information in respect of such goods is available from us. You will be responsible for the disposal of any waste arising from the products and will apply with applicable regulations, laws and waste management licences relating to such waste. LAST UPDATED: October 2022. UNIQUE TO PREMIER GARDEN SUPPLIES.
Category: driveway / Tags: arched, bespoke, driveway, edge, feather, gates, made2measure, semi-braced
PGS Driveway Gates BESPOKE Made2Measure Fully Framed Tongue & Groove Arched 6ft
PGS Driveway Gates BESPOKE Made2Measure Fully Framed Tongue & Groove Arched 6ft. Height: 5ft to 6ft Bespoke Custom Made To Measure Driveway Double Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] PLEASE ENSURE YOU ADD YOUR MEASUREMENTS CORRECTLY WHEN ORDERING Custom Height: We can Custom Make this between 150cm to 180cm. Custom Length: This is Optional please ensure you select the size above your required measurement. Please send us your measurements in mm as explained in the images on this listing. This is for a set of fully Made-to-measure driveway gates. When ordering measurements for height and total width in millimetres should be included with the order. Please ensure you choose the correct option that falls within your required sizes. When measuring for the driveway gates you should deduct 10mm on each side for the hinges and a further 10mm in the centre for the gates to close and open without catching. We can not be held responsible for measurements supplied incorrectly. (Normally within 6 to 12 hours from placing the order Monday to Friday). An approximate 20cm arch is crafted out of the top, which spans across both gates making the loining part of the two gates the centre of the arch and the true height of the gate. The tongue & groove boards used on the gate are smooth-planedtimber and are approx. 120mm wide and 12mm thick each, the boards are interlocked providing you with a smooth flat surface. Both gates are fully framed using approximately 34mm x 70mm timber which has been smooth-planed. A full perimeter frame on each gate along with a diagonal brace. Depending on the height and width extra centre and diagonal bracing may be added to ensure ultimate strong and sturdy gates. Supplied with either our 450mm Hinge & Ring Latch Kit. 6x 450mm Black Epoxy Coated T-Hinghes. 1x Black Epoxy Coated Ring Latch. 2x Black Epoxy Coated Brenton Pad Bolts. Enough Black screws to install kit fully. Or our 600mm Hinge & Ring Latch Kit. 6x 600mm Black Epoxy Coated T-Hinghes. Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather. Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected. We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry. Height: 5-6ft (150-180cm High) Bespoke Custom Made To Measure Driveway Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] Tongue & Groove Fully Framed Arch Top Gates (Pair) with Optional Hinge Packs. Handmade in our Telford Shropshire workshop these tongue & groove fully framed arched top driveway gates provide a traditional feel to your entrances, adding a smooth flat surface, charm and character as well as privacy and protection. You can expect a high-quality finish and a set of gates that will last for many years to come. Our tongue & groove driveway gates are made from extremely durable with smooth-planed interlocking 120mm wide and 12mm thick tongue & groove boards and heavy-duty 70mm x 34mm fully framed bracing to ensure a good solid structure is formed. All parts of the gate have been treated using a tanalised pressure treatment to penetrate the wood and ensure long life and resistance to rot. We can deliver all items locally. We cover Telford, Shrewsbury, Bridgnorth and surrounding areas. Item(s) will be dispatched Monday through to Friday, we do not despatch items on a Saturday or Sunday. Iterms dispatch on a Friday will be delivered the following Monday / Tuesday. Your item(s) will arrive up to 24-48 hours after dispatch. Deliveries are made Monday to Friday weekend deliveries are location dependent. If your item(s) can be left safe or with a neighbour please advise at the time of your order. We offer a fast turn around service on most of our items (Delivered Monday to Friday only) sent out via the courier service. Premier Garden Supplies was established in 2013 with alot of hard work and dedication we have been lucky enough to have expanded our business each year. We are a small independent family run business based in Doseley, Telford where we have been trading from the start. Premier Garden Supplies believes that excellent customer service is key as well as keeping our prices as low as possible without compromising the quality of our products. We try our very best to help our customers old or new find exactly what they need. We supply the trade industry as well as the public with a wide selection of fencing and trellis panels, gates and fence posts. We manufacture all of our feather edge fence panels on site and also various different styles of trellis which are available in many different sizes. We also offer a custom sizing or made to measure fence panels (feather edge) gates and trellis service. We can supply concrete posts and concrete gravel boards, lap panels and we also stock a great selection of European style fencing, all available at very competitive prices. We can also supply other garden items such as pergolas, corner arbours, arbours, planters, bin stores and sleepers. Premier Garden Supplies LTD Terms and Conditions. By placing an order, you agree to our Terms and Conditions as set out below. Any drawings, descriptive matter or advertising produced by us and any descriptions or illustrations contained on our website are produced for the sole purpose of giving an approximate idea of the goods referred to in them. They shall not form part of the contract nor have any contractual force. A quotation for the goods given by us shall not constitute an offer. You will have an opportunity to check and correct any input errors in your order up until the point at which you place your order. For bespoke orders we will require your confirmation response in order to place your order into the manufacturing process. Once you have confirmed the sizes then this is the start point of your order. You may correct errors on your order up to the point at which you submit your order during the order process. It should be noted that if the order has entered the manufacturing process a correction will not be made. Where we accept your order, we have a legal duty to supply goods that are in conformity with these Terms and Conditions. All prices include the current applicable VAT rate unless otherwise stated. Prices quoted are applicable to the quantity specified and, on the information, provided by you at the time of order. Occasionally, an error may occur, and goods may be either incorrectly priced or described in which case we will not be obliged to supply the goods at the incorrect price or in accordance with the incorrect description or at all. We reserve the right to correct any errors from time to time. The description of the goods is set out in our quotation or confirmation of your order. We may supply goods in either metric or imperial sizes in the nearest equivalent measure and goods may be charged in metric if an allowance for conversion is needed. All descriptive matter, drawings, specifications, and advertising is published or issued for the purpose of giving an approximate idea of the described goods. They shall not form part of the contract and this shall not be a sale by sample. Each order will be considered a separate order and we are not able to guarantee that further orders for the same goods will match any previous order. In the event of special tolerances being required in the goods supplied beyond those generally accepted in the fencing trade, no liability will attach to us unless notified in writing to us at the time of your order and in return we acknowledge in writing that we are prepared to accept said order. Timber is natural organic material and will contain knots and sap, the timber may swell, shrink and/or warp which can cause splitting to occur. This is to be expected and is not a defect. Wood that has been pressure treated will shrink as the water used in the treatment process evaporates from the timber. It is very unusual for any of these natural weathering characteristics to be detrimental to the structural strength or shorten the life expectancy of the timber. We do not recommend using dark stains on gates as they attract heat which may cause additional movement in the timber. Website Photos and Images. All product Photographs and images are for illustration purpose only. The actual product may vary from the photo shown. Due to the treatment process the colour of softwood timber will vary in colour from the photos. Also, softwood timber will start off a shade of green depending on when it was treated, and then fade when in the sun. We cannot match softwood timber colour to existing timber. We will include tracking numbers for these orders. Items will be dispatched from us on a Monday through to Friday only, we do not dispatch any items on a Saturday or a Sunday. You should allow 48 hours from dispatch for your item to arrive. You may if necessary, instruct us to leave your items safe if you wish to do so at your own risk. We will not be held responsible if your items have been delivered/left safe for you and any issues arise from your instruction. However, this may not always be possible. We strongly suggest that you do not schedule or commence any installation work until after you have received your order and checked all the goods are suitable for your purposes and do not have any defects or missing parts. We shall not be held liable for any consequential loss. You may collect goods from us during our trading hours. If they are not collected within 7 days from when we notify you, they are available, a storage charge may at our discretion be charged. If you collect goods from us you are solely responsible for the size weight and positioning of the load on the vehicle and shall indemnify us in respect of all costs, claims, losses or expenses we may incur as a result of you collecting the goods. If the goods are to be deposited other than on your private property, you shall be responsible for compliance with all regulations, and for all steps which need to be taken for the protection always of the persons or property. You shall inspect the goods at the place and time of unloading or collection. Risk in the goods shall pass to you when the goods are delivered. The goods shall remain with us until you pay all sums due to us, whether in respect of this contract or otherwise. We shall be entitled, at any time, to recover any or all of the goods in your possession to which we have title and for that purpose, We, our employees or agents may, with such transport as is necessary, enter upon any premises occupied by you, or to which you have access and where goods may be, or believed to be situated. Faulty Products and Products Delivered Damaged. Please have your order number to hand as well as details of the affected product(s). We should be given reasonable opportunity after receiving notice to examine the products affected. We may ask you to provide photographs of any damage, defects or defective workmanship or material. You agree to not make any further use of such goods after giving such notice. The defect is not due to wilful damage, negligence (other than ours) fair wear and tear, alteration or repair of such goods without our prior written consent or incorrect storage, application, movement, installation, commissioning and the defect is not due to any act or omission of you, your agents or contractors. In the situation an item is faulty, not as described or delivered damaged, we will try and resolve the issue with one of the following options. We shall not be liable to you for any economic loss, loss of profit, or loss of business. In each case whether direct, indirect or consequential, or any other indirect losses whatsoever and howsoever caused. If we receive cancellation notice outside of these time frames, your consumer cancellation right will not apply. Please note if you exercise your consumer cancellation rights after the products have been dispatched, you will be responsible for returning products to us at your own cost and within 14 days of cancelling your order. Certain goods supplied by us could, if used incorrectly, give rise to risks to health and safety. Information in respect of such goods is available from us. You will be responsible for the disposal of any waste arising from the products and will apply with applicable regulations, laws and waste management licences relating to such waste. LAST UPDATED: October 2022. UNIQUE TO PREMIER GARDEN SUPPLIES.
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Tongue & Groove Arched 3ft
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Tongue & Groove Arched 3ft. Height: upto 3ft Bespoke Custom Made To Measure Driveway Double Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] PLEASE ENSURE YOU ADD YOUR MEASUREMENTS CORRECTLY WHEN ORDERING Custom Height: We can Custom Make this between 60cm to 90cm. Custom Length: This is Optional please ensure you select the size above your required measurement. Please send us your measurements in mm as explained in the images on this listing. This is for a set of fully Made-to-measure driveway gates. When ordering measurements for height and total width in millimetres should be included with the order. Please ensure you choose the correct option that falls within your required sizes. When measuring for the driveway gates you should deduct 10mm on each side for the hinges and a further 10mm in the centre for the gates to close and open without catching. We can not be held responsible for measurements supplied incorrectly. (Normally within 6 to 12 hours from placing the order Monday to Friday). An approximate 20cm arch is crafted out of the top, which spans across both gates making the loining part of the two gates the centre of the arch and the true height of the gate. The tongue & groove boards used on the gate are smooth-planedtimber and are approx. 120mm wide and 12mm thick each, the boards are interlocked providing you with a smooth flat surface. Both gates are semi-braced framed using approximately 34mm x 70mm timber which has been smooth-planed. Horizontal frame bracing is top and bottom with a diagonal brace joining them together. Depending on the height and width an extra horizontal centre and diagonal bracing may be added to ensure you are provided with strong and sturdy gates. Supplied with either our 450mm Hinge & Ring Latch Kit. 6x 450mm Black Epoxy Coated T-Hinghes. 1x Black Epoxy Coated Ring Latch. 2x Black Epoxy Coated Brenton Pad Bolts. Enough Black screws to install kit fully. Or our 600mm Hinge & Ring Latch Kit. 6x 600mm Black Epoxy Coated T-Hinghes. Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather. Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected. We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry. Height: 2-3ft (60-90cm High) Bespoke Custom Made to Measure Driveway Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] Tongue & Groove Semi Braced Arch Top Gates (Pair) with Optional Hinge Packs. Handmade in our Telford Shropshire workshop these tongue & groove semi-braced arched top driveway gates provide a traditional feel to your entrances, adding a smooth flat surface, charm and character as well as privacy and protection. You can expect a high-quality finish and a set of gates that will last for many years to come. Our tongue & groove driveway gates are made from extremely durable with smooth-planed interlocking 120mm wide and 12mm thick tongue & groove boards and a sturdy 70mm x 34mm semi-bracing to ensure a lighter frame while offering a good solid structure. All parts of the gate have been treated using a tanalised pressure treatment to penetrate the wood and ensure long life and resistance to rot. We can deliver all items locally. We cover Telford, Shrewsbury, Bridgnorth and surrounding areas. Item(s) will be dispatched Monday through to Friday, we do not despatch items on a Saturday or Sunday. Iterms dispatch on a Friday will be delivered the following Monday / Tuesday. Your item(s) will arrive up to 24-48 hours after dispatch. Deliveries are made Monday to Friday weekend deliveries are location dependent. If your item(s) can be left safe or with a neighbour please advise at the time of your order. We offer a fast turn around service on most of our items (Delivered Monday to Friday only) sent out via the courier service. Premier Garden Supplies was established in 2013 with alot of hard work and dedication we have been lucky enough to have expanded our business each year. We are a small independent family run business based in Doseley, Telford where we have been trading from the start. Premier Garden Supplies believes that excellent customer service is key as well as keeping our prices as low as possible without compromising the quality of our products. We try our very best to help our customers old or new find exactly what they need. We supply the trade industry as well as the public with a wide selection of fencing and trellis panels, gates and fence posts. We manufacture all of our feather edge fence panels on site and also various different styles of trellis which are available in many different sizes. We also offer a custom sizing or made to measure fence panels (feather edge) gates and trellis service. We can supply concrete posts and concrete gravel boards, lap panels and we also stock a great selection of European style fencing, all available at very competitive prices. We can also supply other garden items such as pergolas, corner arbours, arbours, planters, bin stores and sleepers. Premier Garden Supplies LTD Terms and Conditions. By placing an order, you agree to our Terms and Conditions as set out below. Any drawings, descriptive matter or advertising produced by us and any descriptions or illustrations contained on our website are produced for the sole purpose of giving an approximate idea of the goods referred to in them. They shall not form part of the contract nor have any contractual force. A quotation for the goods given by us shall not constitute an offer. You will have an opportunity to check and correct any input errors in your order up until the point at which you place your order. For bespoke orders we will require your confirmation response in order to place your order into the manufacturing process. Once you have confirmed the sizes then this is the start point of your order. You may correct errors on your order up to the point at which you submit your order during the order process. It should be noted that if the order has entered the manufacturing process a correction will not be made. Where we accept your order, we have a legal duty to supply goods that are in conformity with these Terms and Conditions. All prices include the current applicable VAT rate unless otherwise stated. Prices quoted are applicable to the quantity specified and, on the information, provided by you at the time of order. Occasionally, an error may occur, and goods may be either incorrectly priced or described in which case we will not be obliged to supply the goods at the incorrect price or in accordance with the incorrect description or at all. We reserve the right to correct any errors from time to time. The description of the goods is set out in our quotation or confirmation of your order. We may supply goods in either metric or imperial sizes in the nearest equivalent measure and goods may be charged in metric if an allowance for conversion is needed. All descriptive matter, drawings, specifications, and advertising is published or issued for the purpose of giving an approximate idea of the described goods. They shall not form part of the contract and this shall not be a sale by sample. Each order will be considered a separate order and we are not able to guarantee that further orders for the same goods will match any previous order. In the event of special tolerances being required in the goods supplied beyond those generally accepted in the fencing trade, no liability will attach to us unless notified in writing to us at the time of your order and in return we acknowledge in writing that we are prepared to accept said order. Timber is natural organic material and will contain knots and sap, the timber may swell, shrink and/or warp which can cause splitting to occur. This is to be expected and is not a defect. Wood that has been pressure treated will shrink as the water used in the treatment process evaporates from the timber. It is very unusual for any of these natural weathering characteristics to be detrimental to the structural strength or shorten the life expectancy of the timber. We do not recommend using dark stains on gates as they attract heat which may cause additional movement in the timber. Website Photos and Images. All product Photographs and images are for illustration purpose only. The actual product may vary from the photo shown. Due to the treatment process the colour of softwood timber will vary in colour from the photos. Also, softwood timber will start off a shade of green depending on when it was treated, and then fade when in the sun. We cannot match softwood timber colour to existing timber. We will include tracking numbers for these orders. Items will be dispatched from us on a Monday through to Friday only, we do not dispatch any items on a Saturday or a Sunday. You should allow 48 hours from dispatch for your item to arrive. You may if necessary, instruct us to leave your items safe if you wish to do so at your own risk. We will not be held responsible if your items have been delivered/left safe for you and any issues arise from your instruction. However, this may not always be possible. We strongly suggest that you do not schedule or commence any installation work until after you have received your order and checked all the goods are suitable for your purposes and do not have any defects or missing parts. We shall not be held liable for any consequential loss. You may collect goods from us during our trading hours. If they are not collected within 7 days from when we notify you, they are available, a storage charge may at our discretion be charged. If you collect goods from us you are solely responsible for the size weight and positioning of the load on the vehicle and shall indemnify us in respect of all costs, claims, losses or expenses we may incur as a result of you collecting the goods. If the goods are to be deposited other than on your private property, you shall be responsible for compliance with all regulations, and for all steps which need to be taken for the protection always of the persons or property. You shall inspect the goods at the place and time of unloading or collection. Risk in the goods shall pass to you when the goods are delivered. The goods shall remain with us until you pay all sums due to us, whether in respect of this contract or otherwise. We shall be entitled, at any time, to recover any or all of the goods in your possession to which we have title and for that purpose, We, our employees or agents may, with such transport as is necessary, enter upon any premises occupied by you, or to which you have access and where goods may be, or believed to be situated. Faulty Products and Products Delivered Damaged. Please have your order number to hand as well as details of the affected product(s). We should be given reasonable opportunity after receiving notice to examine the products affected. We may ask you to provide photographs of any damage, defects or defective workmanship or material. You agree to not make any further use of such goods after giving such notice. The defect is not due to wilful damage, negligence (other than ours) fair wear and tear, alteration or repair of such goods without our prior written consent or incorrect storage, application, movement, installation, commissioning and the defect is not due to any act or omission of you, your agents or contractors. In the situation an item is faulty, not as described or delivered damaged, we will try and resolve the issue with one of the following options. We shall not be liable to you for any economic loss, loss of profit, or loss of business. In each case whether direct, indirect or consequential, or any other indirect losses whatsoever and howsoever caused. If we receive cancellation notice outside of these time frames, your consumer cancellation right will not apply. Please note if you exercise your consumer cancellation rights after the products have been dispatched, you will be responsible for returning products to us at your own cost and within 14 days of cancelling your order. Certain goods supplied by us could, if used incorrectly, give rise to risks to health and safety. Information in respect of such goods is available from us. You will be responsible for the disposal of any waste arising from the products and will apply with applicable regulations, laws and waste management licences relating to such waste. LAST UPDATED: October 2022. UNIQUE TO PREMIER GARDEN SUPPLIES.
Category: driveway / Tags: arched, bespoke, driveway, gates, groove, made2measure, semi-braced, tongue
PGS Driveway Gates BESPOKE Made2Measure Fully Framed Tongue & Groove Arched 4ft
PGS Driveway Gates BESPOKE Made2Measure Fully Framed Tongue & Groove Arched 4ft. Height: 3ft to 4ft Bespoke Custom Made To Measure Driveway Double Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] PLEASE ENSURE YOU ADD YOUR MEASUREMENTS CORRECTLY WHEN ORDERING Custom Height: We can Custom Make this between 90cm to 120cm. Custom Length: This is Optional please ensure you select the size above your required measurement. Please send us your measurements in mm as explained in the images on this listing. This is for a set of fully Made-to-measure driveway gates. When ordering measurements for height and total width in millimetres should be included with the order. Please ensure you choose the correct option that falls within your required sizes. When measuring for the driveway gates you should deduct 10mm on each side for the hinges and a further 10mm in the centre for the gates to close and open without catching. We can not be held responsible for measurements supplied incorrectly. (Normally within 6 to 12 hours from placing the order Monday to Friday). An approximate 20cm arch is crafted out of the top, which spans across both gates making the loining part of the two gates the centre of the arch and the true height of the gate. The tongue & groove boards used on the gate are smooth-planedtimber and are approx. 120mm wide and 12mm thick each, the boards are interlocked providing you with a smooth flat surface. Both gates are fully framed using approximately 34mm x 70mm timber which has been smooth-planed. A full perimeter frame on each gate along with a diagonal brace. Depending on the height and width extra centre and diagonal bracing may be added to ensure ultimate strong and sturdy gates. Supplied with either our 450mm Hinge & Ring Latch Kit. 6x 450mm Black Epoxy Coated T-Hinghes. 1x Black Epoxy Coated Ring Latch. 2x Black Epoxy Coated Brenton Pad Bolts. Enough Black screws to install kit fully. Or our 600mm Hinge & Ring Latch Kit. 6x 600mm Black Epoxy Coated T-Hinghes. Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather. Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected. We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry. Height: 3-4ft (90-120cm High) Bespoke Custom Made To Measure Driveway Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] Tongue & Groove Fully Framed Arch Top Gates (Pair) with Optional Hinge Packs. Handmade in our Telford Shropshire workshop these tongue & groove fully framed arched top driveway gates provide a traditional feel to your entrances, adding a smooth flat surface, charm and character as well as privacy and protection. You can expect a high-quality finish and a set of gates that will last for many years to come. Our tongue & groove driveway gates are made from extremely durable with smooth-planed interlocking 120mm wide and 12mm thick tongue & groove boards and heavy-duty 70mm x 34mm fully framed bracing to ensure a good solid structure is formed. All parts of the gate have been treated using a tanalised pressure treatment to penetrate the wood and ensure long life and resistance to rot. We can deliver all items locally. We cover Telford, Shrewsbury, Bridgnorth and surrounding areas. Item(s) will be dispatched Monday through to Friday, we do not despatch items on a Saturday or Sunday. Iterms dispatch on a Friday will be delivered the following Monday / Tuesday. Your item(s) will arrive up to 24-48 hours after dispatch. Deliveries are made Monday to Friday weekend deliveries are location dependent. If your item(s) can be left safe or with a neighbour please advise at the time of your order. We offer a fast turn around service on most of our items (Delivered Monday to Friday only) sent out via the courier service. Premier Garden Supplies was established in 2013 with alot of hard work and dedication we have been lucky enough to have expanded our business each year. We are a small independent family run business based in Doseley, Telford where we have been trading from the start. Premier Garden Supplies believes that excellent customer service is key as well as keeping our prices as low as possible without compromising the quality of our products. We try our very best to help our customers old or new find exactly what they need. We supply the trade industry as well as the public with a wide selection of fencing and trellis panels, gates and fence posts. We manufacture all of our feather edge fence panels on site and also various different styles of trellis which are available in many different sizes. We also offer a custom sizing or made to measure fence panels (feather edge) gates and trellis service. We can supply concrete posts and concrete gravel boards, lap panels and we also stock a great selection of European style fencing, all available at very competitive prices. We can also supply other garden items such as pergolas, corner arbours, arbours, planters, bin stores and sleepers. Premier Garden Supplies LTD Terms and Conditions. By placing an order, you agree to our Terms and Conditions as set out below. Any drawings, descriptive matter or advertising produced by us and any descriptions or illustrations contained on our website are produced for the sole purpose of giving an approximate idea of the goods referred to in them. They shall not form part of the contract nor have any contractual force. A quotation for the goods given by us shall not constitute an offer. You will have an opportunity to check and correct any input errors in your order up until the point at which you place your order. For bespoke orders we will require your confirmation response in order to place your order into the manufacturing process. Once you have confirmed the sizes then this is the start point of your order. You may correct errors on your order up to the point at which you submit your order during the order process. It should be noted that if the order has entered the manufacturing process a correction will not be made. Where we accept your order, we have a legal duty to supply goods that are in conformity with these Terms and Conditions. All prices include the current applicable VAT rate unless otherwise stated. Prices quoted are applicable to the quantity specified and, on the information, provided by you at the time of order. Occasionally, an error may occur, and goods may be either incorrectly priced or described in which case we will not be obliged to supply the goods at the incorrect price or in accordance with the incorrect description or at all. We reserve the right to correct any errors from time to time. The description of the goods is set out in our quotation or confirmation of your order. We may supply goods in either metric or imperial sizes in the nearest equivalent measure and goods may be charged in metric if an allowance for conversion is needed. All descriptive matter, drawings, specifications, and advertising is published or issued for the purpose of giving an approximate idea of the described goods. They shall not form part of the contract and this shall not be a sale by sample. Each order will be considered a separate order and we are not able to guarantee that further orders for the same goods will match any previous order. In the event of special tolerances being required in the goods supplied beyond those generally accepted in the fencing trade, no liability will attach to us unless notified in writing to us at the time of your order and in return we acknowledge in writing that we are prepared to accept said order. Timber is natural organic material and will contain knots and sap, the timber may swell, shrink and/or warp which can cause splitting to occur. This is to be expected and is not a defect. Wood that has been pressure treated will shrink as the water used in the treatment process evaporates from the timber. It is very unusual for any of these natural weathering characteristics to be detrimental to the structural strength or shorten the life expectancy of the timber. We do not recommend using dark stains on gates as they attract heat which may cause additional movement in the timber. Website Photos and Images. All product Photographs and images are for illustration purpose only. The actual product may vary from the photo shown. Due to the treatment process the colour of softwood timber will vary in colour from the photos. Also, softwood timber will start off a shade of green depending on when it was treated, and then fade when in the sun. We cannot match softwood timber colour to existing timber. We will include tracking numbers for these orders. Items will be dispatched from us on a Monday through to Friday only, we do not dispatch any items on a Saturday or a Sunday. You should allow 48 hours from dispatch for your item to arrive. You may if necessary, instruct us to leave your items safe if you wish to do so at your own risk. We will not be held responsible if your items have been delivered/left safe for you and any issues arise from your instruction. However, this may not always be possible. We strongly suggest that you do not schedule or commence any installation work until after you have received your order and checked all the goods are suitable for your purposes and do not have any defects or missing parts. We shall not be held liable for any consequential loss. You may collect goods from us during our trading hours. If they are not collected within 7 days from when we notify you, they are available, a storage charge may at our discretion be charged. If you collect goods from us you are solely responsible for the size weight and positioning of the load on the vehicle and shall indemnify us in respect of all costs, claims, losses or expenses we may incur as a result of you collecting the goods. If the goods are to be deposited other than on your private property, you shall be responsible for compliance with all regulations, and for all steps which need to be taken for the protection always of the persons or property. You shall inspect the goods at the place and time of unloading or collection. Risk in the goods shall pass to you when the goods are delivered. The goods shall remain with us until you pay all sums due to us, whether in respect of this contract or otherwise. We shall be entitled, at any time, to recover any or all of the goods in your possession to which we have title and for that purpose, We, our employees or agents may, with such transport as is necessary, enter upon any premises occupied by you, or to which you have access and where goods may be, or believed to be situated. Faulty Products and Products Delivered Damaged. Please have your order number to hand as well as details of the affected product(s). We should be given reasonable opportunity after receiving notice to examine the products affected. We may ask you to provide photographs of any damage, defects or defective workmanship or material. You agree to not make any further use of such goods after giving such notice. The defect is not due to wilful damage, negligence (other than ours) fair wear and tear, alteration or repair of such goods without our prior written consent or incorrect storage, application, movement, installation, commissioning and the defect is not due to any act or omission of you, your agents or contractors. In the situation an item is faulty, not as described or delivered damaged, we will try and resolve the issue with one of the following options. We shall not be liable to you for any economic loss, loss of profit, or loss of business. In each case whether direct, indirect or consequential, or any other indirect losses whatsoever and howsoever caused. If we receive cancellation notice outside of these time frames, your consumer cancellation right will not apply. Please note if you exercise your consumer cancellation rights after the products have been dispatched, you will be responsible for returning products to us at your own cost and within 14 days of cancelling your order. Certain goods supplied by us could, if used incorrectly, give rise to risks to health and safety. Information in respect of such goods is available from us. You will be responsible for the disposal of any waste arising from the products and will apply with applicable regulations, laws and waste management licences relating to such waste. LAST UPDATED: October 2022. UNIQUE TO PREMIER GARDEN SUPPLIES.
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Feather Edge Arched 5ft
PGS Driveway Gates BESPOKE Made2Measure Semi-Braced Feather Edge Arched 5ft. Height: 4ft to 5ft Bespoke Custom Made To Measure Driveway Double Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] PLEASE ENSURE YOU ADD YOUR MEASUREMENTS CORRECTLY WHEN ORDERING Custom Height: We can Custom Make this between 120cm to 150cm. Custom Length: This is Optional please ensure you select the size above your required measurement. Please send us your measurements in mm as explained in the images on this listing. This is for a set of fully Made-to-measure driveway gates. When ordering measurements for height and total width in millimetres should be included with the order. Please ensure you choose the correct option that falls within your required sizes. When measuring for the driveway gates you should deduct 10mm on each side for the hinges and a further 10mm in the centre for the gates to close and open without catching. We can not be held responsible for measurements supplied incorrectly. (Normally within 6 to 12 hours from placing the order Monday to Friday). An approximate 20cm arch is crafted out of the top, which spans across both gates making the loining part of the two gates the centre of the arch and the true height of the gate. The feather edge boards used on the gate are rough sawn timber and are approx. 125mm wide with a 15mm thick edge each, these are positioned overlapping to form a closeboard effect. Both gates are semi-braced framed using approximately 34mm x 70mm timber which has been smooth-planed. Horizontal frame bracing is top and bottom with a diagonal brace joining them together. Depending on the height and width an extra horizontal centre and diagonal bracing may be added to ensure you are provided with strong and sturdy gates. Supplied with either our 450mm Hinge & Ring Latch Kit. 6x 450mm Black Epoxy Coated T-Hinghes. 1x Black Epoxy Coated Ring Latch. 2x Black Epoxy Coated Brenton Pad Bolts. Enough Black screws to install kit fully. Or our 600mm Hinge & Ring Latch Kit. 6x 600mm Black Epoxy Coated T-Hinghes. Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather. Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected. We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry. Height: 4-5ft (120-150cm High) Bespoke Custom Made To Measure Driveway Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] Fefther Edge Semi Braced Arch Top Gates (Pair) with Optional Hinge Packs. Handmade in our Telford Shropshire workshop these feather edge semi-braced arched top driveway gates provide a traditional feel to your entrances, adding charm and character as well as privacy and protection. You can expect a high-quality finish and a set of gates that will last for many years to come. Our Feather edge driveway gates are made from extremely durable with rough-sawn overlapping 125mm wide and 15mm thick feather edge boards and a sturdy 70mm x 34mm semi-bracing to ensure a lighter frame while offering a good solid structure. All parts of the gate have been treated using a tanalised pressure treatment to penetrate the wood and ensure long life and resistance to rot. We can deliver all items locally. We cover Telford, Shrewsbury, Bridgnorth and surrounding areas. Item(s) will be dispatched Monday through to Friday, we do not despatch items on a Saturday or Sunday. Iterms dispatch on a Friday will be delivered the following Monday / Tuesday. Your item(s) will arrive up to 24-48 hours after dispatch. Deliveries are made Monday to Friday weekend deliveries are location dependent. If your item(s) can be left safe or with a neighbour please advise at the time of your order. We offer a fast turn around service on most of our items (Delivered Monday to Friday only) sent out via the courier service. Premier Garden Supplies was established in 2013 with alot of hard work and dedication we have been lucky enough to have expanded our business each year. We are a small independent family run business based in Doseley, Telford where we have been trading from the start. Premier Garden Supplies believes that excellent customer service is key as well as keeping our prices as low as possible without compromising the quality of our products. We try our very best to help our customers old or new find exactly what they need. We supply the trade industry as well as the public with a wide selection of fencing and trellis panels, gates and fence posts. We manufacture all of our feather edge fence panels on site and also various different styles of trellis which are available in many different sizes. We also offer a custom sizing or made to measure fence panels (feather edge) gates and trellis service. We can supply concrete posts and concrete gravel boards, lap panels and we also stock a great selection of European style fencing, all available at very competitive prices. We can also supply other garden items such as pergolas, corner arbours, arbours, planters, bin stores and sleepers. Premier Garden Supplies LTD Terms and Conditions. By placing an order, you agree to our Terms and Conditions as set out below. Any drawings, descriptive matter or advertising produced by us and any descriptions or illustrations contained on our website are produced for the sole purpose of giving an approximate idea of the goods referred to in them. They shall not form part of the contract nor have any contractual force. A quotation for the goods given by us shall not constitute an offer. You will have an opportunity to check and correct any input errors in your order up until the point at which you place your order. For bespoke orders we will require your confirmation response in order to place your order into the manufacturing process. Once you have confirmed the sizes then this is the start point of your order. You may correct errors on your order up to the point at which you submit your order during the order process. It should be noted that if the order has entered the manufacturing process a correction will not be made. Where we accept your order, we have a legal duty to supply goods that are in conformity with these Terms and Conditions. All prices include the current applicable VAT rate unless otherwise stated. Prices quoted are applicable to the quantity specified and, on the information, provided by you at the time of order. Occasionally, an error may occur, and goods may be either incorrectly priced or described in which case we will not be obliged to supply the goods at the incorrect price or in accordance with the incorrect description or at all. We reserve the right to correct any errors from time to time. The description of the goods is set out in our quotation or confirmation of your order. We may supply goods in either metric or imperial sizes in the nearest equivalent measure and goods may be charged in metric if an allowance for conversion is needed. All descriptive matter, drawings, specifications, and advertising is published or issued for the purpose of giving an approximate idea of the described goods. They shall not form part of the contract and this shall not be a sale by sample. Each order will be considered a separate order and we are not able to guarantee that further orders for the same goods will match any previous order. In the event of special tolerances being required in the goods supplied beyond those generally accepted in the fencing trade, no liability will attach to us unless notified in writing to us at the time of your order and in return we acknowledge in writing that we are prepared to accept said order. Timber is natural organic material and will contain knots and sap, the timber may swell, shrink and/or warp which can cause splitting to occur. This is to be expected and is not a defect. Wood that has been pressure treated will shrink as the water used in the treatment process evaporates from the timber. It is very unusual for any of these natural weathering characteristics to be detrimental to the structural strength or shorten the life expectancy of the timber. We do not recommend using dark stains on gates as they attract heat which may cause additional movement in the timber. Website Photos and Images. All product Photographs and images are for illustration purpose only. The actual product may vary from the photo shown. Due to the treatment process the colour of softwood timber will vary in colour from the photos. Also, softwood timber will start off a shade of green depending on when it was treated, and then fade when in the sun. We cannot match softwood timber colour to existing timber. We will include tracking numbers for these orders. Items will be dispatched from us on a Monday through to Friday only, we do not dispatch any items on a Saturday or a Sunday. You should allow 48 hours from dispatch for your item to arrive. You may if necessary, instruct us to leave your items safe if you wish to do so at your own risk. We will not be held responsible if your items have been delivered/left safe for you and any issues arise from your instruction. However, this may not always be possible. We strongly suggest that you do not schedule or commence any installation work until after you have received your order and checked all the goods are suitable for your purposes and do not have any defects or missing parts. We shall not be held liable for any consequential loss. You may collect goods from us during our trading hours. If they are not collected within 7 days from when we notify you, they are available, a storage charge may at our discretion be charged. If you collect goods from us you are solely responsible for the size weight and positioning of the load on the vehicle and shall indemnify us in respect of all costs, claims, losses or expenses we may incur as a result of you collecting the goods. If the goods are to be deposited other than on your private property, you shall be responsible for compliance with all regulations, and for all steps which need to be taken for the protection always of the persons or property. You shall inspect the goods at the place and time of unloading or collection. Risk in the goods shall pass to you when the goods are delivered. The goods shall remain with us until you pay all sums due to us, whether in respect of this contract or otherwise. We shall be entitled, at any time, to recover any or all of the goods in your possession to which we have title and for that purpose, We, our employees or agents may, with such transport as is necessary, enter upon any premises occupied by you, or to which you have access and where goods may be, or believed to be situated. Faulty Products and Products Delivered Damaged. Please have your order number to hand as well as details of the affected product(s). We should be given reasonable opportunity after receiving notice to examine the products affected. We may ask you to provide photographs of any damage, defects or defective workmanship or material. You agree to not make any further use of such goods after giving such notice. The defect is not due to wilful damage, negligence (other than ours) fair wear and tear, alteration or repair of such goods without our prior written consent or incorrect storage, application, movement, installation, commissioning and the defect is not due to any act or omission of you, your agents or contractors. In the situation an item is faulty, not as described or delivered damaged, we will try and resolve the issue with one of the following options. We shall not be liable to you for any economic loss, loss of profit, or loss of business. In each case whether direct, indirect or consequential, or any other indirect losses whatsoever and howsoever caused. If we receive cancellation notice outside of these time frames, your consumer cancellation right will not apply. Please note if you exercise your consumer cancellation rights after the products have been dispatched, you will be responsible for returning products to us at your own cost and within 14 days of cancelling your order. Certain goods supplied by us could, if used incorrectly, give rise to risks to health and safety. Information in respect of such goods is available from us. You will be responsible for the disposal of any waste arising from the products and will apply with applicable regulations, laws and waste management licences relating to such waste. LAST UPDATED: October 2022. UNIQUE TO PREMIER GARDEN SUPPLIES.
Category: driveway / Tags: arched, bespoke, driveway, edge, feather, gates, made2measure, semi-braced
PGS Driveway Gates BESPOKE Made2Measure Fully Framed Tongue & Groove Arched 3ft
PGS Driveway Gates BESPOKE Made2Measure Fully Framed Tongue & Groove Arched 3ft. Height: upto 3ft Bespoke Custom Made To Measure Driveway Double Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] PLEASE ENSURE YOU ADD YOUR MEASUREMENTS CORRECTLY WHEN ORDERING Custom Height: We can Custom Make this between 60cm to 90cm. Custom Length: This is Optional please ensure you select the size above your required measurement. Please send us your measurements in mm as explained in the images on this listing. This is for a set of fully Made-to-measure driveway gates. When ordering measurements for height and total width in millimetres should be included with the order. Please ensure you choose the correct option that falls within your required sizes. When measuring for the driveway gates you should deduct 10mm on each side for the hinges and a further 10mm in the centre for the gates to close and open without catching. We can not be held responsible for measurements supplied incorrectly. (Normally within 6 to 12 hours from placing the order Monday to Friday). An approximate 20cm arch is crafted out of the top, which spans across both gates making the loining part of the two gates the centre of the arch and the true height of the gate. The tongue & groove boards used on the gate are smooth-planedtimber and are approx. 120mm wide and 12mm thick each, the boards are interlocked providing you with a smooth flat surface. Both gates are fully framed using approximately 34mm x 70mm timber which has been smooth-planed. A full perimeter frame on each gate along with a diagonal brace. Depending on the height and width extra centre and diagonal bracing may be added to ensure ultimate strong and sturdy gates. Supplied with either our 450mm Hinge & Ring Latch Kit. 6x 450mm Black Epoxy Coated T-Hinghes. 1x Black Epoxy Coated Ring Latch. 2x Black Epoxy Coated Brenton Pad Bolts. Enough Black screws to install kit fully. Or our 600mm Hinge & Ring Latch Kit. 6x 600mm Black Epoxy Coated T-Hinghes. Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather. Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected. We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry. Height: 2-3ft (60-90cm High) Bespoke Custom Made To Measure Driveway Swing Gates [Width from 6ft (183cm) to 10ft (305cm)] Tongue & Groove Fully Framed Arch Top Gates (Pair) with Optional Hinge Packs. Handmade in our Telford Shropshire workshop these tongue & groove fully framed arched top driveway gates provide a traditional feel to your entrances, adding a smooth flat surface, charm and character as well as privacy and protection. You can expect a high-quality finish and a set of gates that will last for many years to come. Our tongue & groove driveway gates are made from extremely durable with smooth-planed interlocking 120mm wide and 12mm thick tongue & groove boards and heavy-duty 70mm x 34mm fully framed bracing to ensure a good solid structure is formed. All parts of the gate have been treated using a tanalised pressure treatment to penetrate the wood and ensure long life and resistance to rot. We can deliver all items locally. We cover Telford, Shrewsbury, Bridgnorth and surrounding areas. Item(s) will be dispatched Monday through to Friday, we do not despatch items on a Saturday or Sunday. Iterms dispatch on a Friday will be delivered the following Monday / Tuesday. Your item(s) will arrive up to 24-48 hours after dispatch. Deliveries are made Monday to Friday weekend deliveries are location dependent. If your item(s) can be left safe or with a neighbour please advise at the time of your order. We offer a fast turn around service on most of our items (Delivered Monday to Friday only) sent out via the courier service. Premier Garden Supplies was established in 2013 with alot of hard work and dedication we have been lucky enough to have expanded our business each year. We are a small independent family run business based in Doseley, Telford where we have been trading from the start. Premier Garden Supplies believes that excellent customer service is key as well as keeping our prices as low as possible without compromising the quality of our products. We try our very best to help our customers old or new find exactly what they need. We supply the trade industry as well as the public with a wide selection of fencing and trellis panels, gates and fence posts. We manufacture all of our feather edge fence panels on site and also various different styles of trellis which are available in many different sizes. We also offer a custom sizing or made to measure fence panels (feather edge) gates and trellis service. We can supply concrete posts and concrete gravel boards, lap panels and we also stock a great selection of European style fencing, all available at very competitive prices. We can also supply other garden items such as pergolas, corner arbours, arbours, planters, bin stores and sleepers. Premier Garden Supplies LTD Terms and Conditions. By placing an order, you agree to our Terms and Conditions as set out below. Any drawings, descriptive matter or advertising produced by us and any descriptions or illustrations contained on our website are produced for the sole purpose of giving an approximate idea of the goods referred to in them. They shall not form part of the contract nor have any contractual force. A quotation for the goods given by us shall not constitute an offer. You will have an opportunity to check and correct any input errors in your order up until the point at which you place your order. For bespoke orders we will require your confirmation response in order to place your order into the manufacturing process. Once you have confirmed the sizes then this is the start point of your order. You may correct errors on your order up to the point at which you submit your order during the order process. It should be noted that if the order has entered the manufacturing process a correction will not be made. Where we accept your order, we have a legal duty to supply goods that are in conformity with these Terms and Conditions. All prices include the current applicable VAT rate unless otherwise stated. Prices quoted are applicable to the quantity specified and, on the information, provided by you at the time of order. Occasionally, an error may occur, and goods may be either incorrectly priced or described in which case we will not be obliged to supply the goods at the incorrect price or in accordance with the incorrect description or at all. We reserve the right to correct any errors from time to time. The description of the goods is set out in our quotation or confirmation of your order. We may supply goods in either metric or imperial sizes in the nearest equivalent measure and goods may be charged in metric if an allowance for conversion is needed. All descriptive matter, drawings, specifications, and advertising is published or issued for the purpose of giving an approximate idea of the described goods. They shall not form part of the contract and this shall not be a sale by sample. Each order will be considered a separate order and we are not able to guarantee that further orders for the same goods will match any previous order. In the event of special tolerances being required in the goods supplied beyond those generally accepted in the fencing trade, no liability will attach to us unless notified in writing to us at the time of your order and in return we acknowledge in writing that we are prepared to accept said order. Timber is natural organic material and will contain knots and sap, the timber may swell, shrink and/or warp which can cause splitting to occur. This is to be expected and is not a defect. Wood that has been pressure treated will shrink as the water used in the treatment process evaporates from the timber. It is very unusual for any of these natural weathering characteristics to be detrimental to the structural strength or shorten the life expectancy of the timber. We do not recommend using dark stains on gates as they attract heat which may cause additional movement in the timber. Website Photos and Images. All product Photographs and images are for illustration purpose only. The actual product may vary from the photo shown. Due to the treatment process the colour of softwood timber will vary in colour from the photos. Also, softwood timber will start off a shade of green depending on when it was treated, and then fade when in the sun. We cannot match softwood timber colour to existing timber. We will include tracking numbers for these orders. Items will be dispatched from us on a Monday through to Friday only, we do not dispatch any items on a Saturday or a Sunday. You should allow 48 hours from dispatch for your item to arrive. You may if necessary, instruct us to leave your items safe if you wish to do so at your own risk. We will not be held responsible if your items have been delivered/left safe for you and any issues arise from your instruction. However, this may not always be possible. We strongly suggest that you do not schedule or commence any installation work until after you have received your order and checked all the goods are suitable for your purposes and do not have any defects or missing parts. We shall not be held liable for any consequential loss. You may collect goods from us during our trading hours. If they are not collected within 7 days from when we notify you, they are available, a storage charge may at our discretion be charged. If you collect goods from us you are solely responsible for the size weight and positioning of the load on the vehicle and shall indemnify us in respect of all costs, claims, losses or expenses we may incur as a result of you collecting the goods. If the goods are to be deposited other than on your private property, you shall be responsible for compliance with all regulations, and for all steps which need to be taken for the protection always of the persons or property. You shall inspect the goods at the place and time of unloading or collection. Risk in the goods shall pass to you when the goods are delivered. The goods shall remain with us until you pay all sums due to us, whether in respect of this contract or otherwise. We shall be entitled, at any time, to recover any or all of the goods in your possession to which we have title and for that purpose, We, our employees or agents may, with such transport as is necessary, enter upon any premises occupied by you, or to which you have access and where goods may be, or believed to be situated. Faulty Products and Products Delivered Damaged. Please have your order number to hand as well as details of the affected product(s). We should be given reasonable opportunity after receiving notice to examine the products affected. We may ask you to provide photographs of any damage, defects or defective workmanship or material. You agree to not make any further use of such goods after giving such notice. The defect is not due to wilful damage, negligence (other than ours) fair wear and tear, alteration or repair of such goods without our prior written consent or incorrect storage, application, movement, installation, commissioning and the defect is not due to any act or omission of you, your agents or contractors. In the situation an item is faulty, not as described or delivered damaged, we will try and resolve the issue with one of the following options. We shall not be liable to you for any economic loss, loss of profit, or loss of business. In each case whether direct, indirect or consequential, or any other indirect losses whatsoever and howsoever caused. If we receive cancellation notice outside of these time frames, your consumer cancellation right will not apply. Please note if you exercise your consumer cancellation rights after the products have been dispatched, you will be responsible for returning products to us at your own cost and within 14 days of cancelling your order. Certain goods supplied by us could, if used incorrectly, give rise to risks to health and safety. Information in respect of such goods is available from us. You will be responsible for the disposal of any waste arising from the products and will apply with applicable regulations, laws and waste management licences relating to such waste. LAST UPDATED: October 2022. UNIQUE TO PREMIER GARDEN SUPPLIES.