We are happy to answer any of your questions, but please read the description fully before sending us a message, as many answers to these questions will be found there! We are a small family run business and all our items are handmade by quality craftsmen to a very high standard. HANDMADE TIMBER DRIVEWAY GATES. 3/4 gate + 1/4 gate. These gates are made from PEFC renewable, sustainable, selected Scandinavian redwood joinery graded timber with morticed and tenoned joints. Tongue & groove match boarding. X25mm (finished at 20mm) for 4 x 3 construction gates. All our gates are supplied planed all round and ready for your choice of stain, varnish or paint. Please note that we do not offer a painting or staining service on the gates. We highly recommend using a good quality protection on the gates, such as Sadolins, Sikkens or any “oil based” but NOT “water based” products! If you are unsure of the width required, just let us know the total gap width that you have and we will make allowance for posts (if required) and ironmongery allowance within the gap size. The height of a straight top gate is to the top horizontal rail, then there is an additional 3 of horn either end on most styles of gates, so please bear this in mind if you need clearance below coping stones on brick pillars or if lining them up with fence panels etc. Please let us know which side you prefer to have the 1/4 gate (rear view) as we will need to brace the gates accordingly. Please view our other items for different style gates! Our current lead time from ordering is approximately 8 weeks. J & S JOINERY MANUFACTURERS LTD. The item “COTTAGE STYLE TIMBER / WOODEN / 3/4 + 1/4 / OFFSET SPLIT / DRIVEWAY GATES” is in sale since Saturday, July 31, 2021. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jsjoinery6165″ and is located in Nottingham, Nottinghamshire. This item can’t be shipped, the buyer must pick up the item.
- Country/Region of Manufacture: United Kingdom
- Type: DRIVEWAY GATES (3/4 + 1/4 offset split)
- Features: Heavy Duty
- MPN: Does Not Apply
- Finish: Smooth
- Fixings Supplied: No
- Sub-Type: Gates
- Brand: Unbranded