Tag Archive for offset

Kent Style Timber / Wooden / 3/4 + 1/4 Offset Split / Driveway Gates

Kent-Style-Timber-Wooden-3-4-1-4-Offset-Split-Driveway-Gates-01-nw Kent Style Timber / Wooden / 3/4 + 1/4 Offset Split / Driveway Gates

Kent Style Timber / Wooden / 3/4 + 1/4 Offset Split / Driveway Gates
We are happy to answer any of your questions, but please read the description fully before sending us a message, as many answers to these questions will be found there! We are a small family run business and all our items are handmade by quality craftsmen to a very high standard. HANDMADE TIMBER DRIVE GATES. 3/4 + 1/4 OFFSET SPLIT. These gates are made from PEFC renewable, sustainable, selected Scandinavian redwood joinery graded timber with morticed and tenoned joints. Tongue & groove match boarding. X25mm (finished at 20mm) for 4 x 3 construction gates. All our gates are supplied planed all round and ready for your choice of stain, varnish or paint. Please note that we do not offer a painting or staining service on the gates. We highly recommend using a good quality protection on the gates, such as Sadolins, Sikkens or any “oil based” but NOT “water based” products! If you are unsure of the width required, just let us know the total gap width that you have and we will make allowance for posts (if required) and ironmongery allowance within the gap size. The height of a straight top gate is to the top horizontal rail, then there is an additional 3 of horn either end on most styles of gates, so please bear this in mind if you need clearance below coping stones on brick pillars or if lining them up with fence panels etc. Please let us know which side you prefer to have the 1/4 gate (rear view) as we will need to brace the gates accordingly. Please view our other items for different style gates! Our current lead time from ordering is approximately 8 weeks. J & S JOINERY MANUFACTURERS LTD. The item “KENT STYLE TIMBER / WOODEN / 3/4 + 1/4 OFFSET SPLIT / DRIVEWAY GATES” is in sale since Saturday, July 31, 2021. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jsjoinery6165″ and is located in Nottingham, Nottinghamshire. This item can’t be shipped, the buyer must pick up the item.
  • Country/Region of Manufacture: United Kingdom
  • Type: Driveway Gate
  • Features: Heavy Duty
  • MPN: Does Not Apply
  • Finish: Smooth
  • Fixings Supplied: No
  • Sub-Type: Gates
  • Brand: Unbranded

Kent Style Timber / Wooden / 3/4 + 1/4 Offset Split / Driveway Gates

Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates

Cottage-Style-Timber-Wooden-3-4-1-4-Offset-Split-Driveway-Gates-01-slic Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates
Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates
Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates

Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates
We are happy to answer any of your questions, but please read the description fully before sending us a message, as many answers to these questions will be found there! We are a small family run business and all our items are handmade by quality craftsmen to a very high standard. HANDMADE TIMBER DRIVEWAY GATES. 3/4 gate + 1/4 gate. These gates are made from PEFC renewable, sustainable, selected Scandinavian redwood joinery graded timber with morticed and tenoned joints. Tongue & groove match boarding. X25mm (finished at 20mm) for 4 x 3 construction gates. All our gates are supplied planed all round and ready for your choice of stain, varnish or paint. Please note that we do not offer a painting or staining service on the gates. We highly recommend using a good quality protection on the gates, such as Sadolins, Sikkens or any “oil based” but NOT “water based” products! If you are unsure of the width required, just let us know the total gap width that you have and we will make allowance for posts (if required) and ironmongery allowance within the gap size. The height of a straight top gate is to the top horizontal rail, then there is an additional 3 of horn either end on most styles of gates, so please bear this in mind if you need clearance below coping stones on brick pillars or if lining them up with fence panels etc. Please let us know which side you prefer to have the 1/4 gate (rear view) as we will need to brace the gates accordingly. Please view our other items for different style gates! Our current lead time from ordering is approximately 8 weeks. J & S JOINERY MANUFACTURERS LTD. The item “COTTAGE STYLE TIMBER / WOODEN / 3/4 + 1/4 / OFFSET SPLIT / DRIVEWAY GATES” is in sale since Saturday, July 31, 2021. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jsjoinery6165″ and is located in Nottingham, Nottinghamshire. This item can’t be shipped, the buyer must pick up the item.
  • Country/Region of Manufacture: United Kingdom
  • Type: DRIVEWAY GATES (3/4 + 1/4 offset split)
  • Features: Heavy Duty
  • MPN: Does Not Apply
  • Finish: Smooth
  • Fixings Supplied: No
  • Sub-Type: Gates
  • Brand: Unbranded

Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates

Wooden Tanalised / Treated Pair Of Offset Driveway Gate’s (cpclay09)

Wooden-Tanalised-Treated-Pair-Of-Offset-Driveway-Gate-s-cpclay09-01-sudg Wooden Tanalised / Treated Pair Of Offset Driveway Gate's (cpclay09)
Wooden Tanalised / Treated Pair Of Offset Driveway Gate's (cpclay09)
Wooden Tanalised / Treated Pair Of Offset Driveway Gate's (cpclay09)
Wooden Tanalised / Treated Pair Of Offset Driveway Gate's (cpclay09)
Wooden Tanalised / Treated Pair Of Offset Driveway Gate's (cpclay09)

Wooden Tanalised / Treated Pair Of Offset Driveway Gate's (cpclay09)
Pair of Wooden Offset Green Tanalised Treated Gates. 94mm x 44mm Stiles and Top Rail. 145mm x 28mm Bottom Rail and Middle Rail. 14mm Tongue and groove boards (finished size). Due to transportation purposes there is a slight horn left on the bottom of the gates, this will need removing before fitting. These Gates Can be Made to Measure. To Fit an Opening of 10′ Wide x 5′ High. Width being the Total Opening Size (not Size of Each Gate). With Left Hand gate Being 4′ Wide opening inwards first as looking from the front and the Larger Right Hand gate being 6′ Wide. WITH REBATED CENTER STILES (TO FIT TOGETHER). All our Tanalised Treated Gates are Manufactured from a Planed 5th Scandinavian redwood (High quality Grade of Pine). Please Note That Tanalised Treated Timber Has a Rustic Finish due to the Pressure Treating Process. Once the Timbers Dry over time the colour changes to Brown. All our Products are Made by Hand by Us. Because of the weight of these, we recommend hook and bands (not conventional hinges) to hang these Gates/Doors. All our Tanalised Timber is Treated using Tanalith E, which is a product containing a Biocidal Product (control of wood destroying organisms) Therefore the product can be hung without any treatment needed, but over time in outdoor conditions the treatment fade and a? We would recommend a Solvent / Oil based product for this. Tanalised Timber can be Painted if required but this can only be done once the product is completely dry. All Orders will be delivered Monday to Friday as Standard. Saturday Deliveries can be arranged at an extra cost. If you are in urgent need for any of our items please give us a call. Please Take a Look in our Shop for Many other Styles and Products. We also offer all Designs in either Untreated Timber or Cedar. We can now manufacture all of our timber products from. A Timber which has been through a. Thermal Modification Process, so no additional treatment needed. Thermowood is an environmentally and fully recyclable product. Please ask for a quote. The process involves heating timber to a temperature of 180-220 degrees Celsius which darkens the colour. While at the same time protecting it with steam. 100% Natural no chemicals are added. Thermowood is an environmentally friendly and fully recyclable product. It remains dimensionally stable and the moisture content is also permanently reduced. The moisture content decreases to around 4-6 percent and does not react to changes in humidity drastically as untreated Timber. The cells of wood are modified and that caused changes in the wood characteristics. Resin is removed from the Timber and the process also decreases water absorption. The Timber can be stained or painted. If you would like any other Information or Advice on any of our Products. The item “WOODEN TANALISED / TREATED PAIR OF OFFSET DRIVEWAY GATE’S (CPCLAY09)” is in sale since Thursday, March 18, 2021. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “ktpltd” and is located in Warminster. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.
  • Custom Bundle: No
  • Material: Wood
  • Type: Driveway Gate
  • MPN: Does Not Apply
  • Modified Item: No
  • Non-Domestic Product: No
  • Brand: Kinder Timber Products

Wooden Tanalised / Treated Pair Of Offset Driveway Gate's (cpclay09)

Wooden Driveway Gates Offset Made To Measure Service

Wooden-Driveway-Gates-Offset-Made-To-Measure-Service-01-ukcj Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service
Wooden Driveway Gates Offset Made To Measure Service

Wooden Driveway Gates Offset Made To Measure Service
Driveway gates offset made to measure choose your own horn style. With pedestrian opening on right. Your driveway gates are professionally manufactured and can be made to measure if required. Your driveway gates will be manufactured from handpicked high-quality Scandinavian redwood. For strength your gates are traditionally mortice and tenoned. We glue the mortice and tenons with professional exterior wood glue to prevent water ingress. We also use wooden dowels through the traditional mortice and tenon for added strength. Mortice and tenons date back over 7,000 years and are still one of the strongest methods to join two pieces of timber at 90 degrees. The handpicked redwood is machine planed smooth from 100mm x 50mm rough sawn timber. The driveway gates are framed, ledge & braced and hand made. The gates are designed to be side hung. Gates have a centre rebate right hand opening first. The gates have a top and mid rail with the bottom rail 100mm up from the bottom for the hinge to be fitted. The gates are also braced prevent sagging. Board quantity and wicth may vary on different width gates. Total height is to the top of the horns. We use 110mm x 15mm redwood tongue & groove boarding with a v groove one side, the boarding is then fixed with professional exterior wood glue and secret pinned with stainless steel fixings. The pedestrian gate is for easy access without having to open a larger gate or both. The pedestrian gate will be on the right-hand side when viewed from the outside, unless requested otherwise, so can be made with the pedestrian gate on the left. The pair would be made up of a 3′ wide pedestrian gate, and the remainder would make up the bigger gate. We do not use steel fixings or face nail. Colour and knot content can vary. Your driveway gates will be supplied untreated ready to treat with the colour and type of treatment you desire. If you require a made to measure set of driveway gates just choose the next size up in the drop-down box. If your driveway gates size needed is height 1820mm x width 1820mm you would need to choose height 1828mm x width 1828mm. These gates are not supplied with hinges and fittings. Every effort is made to protect your order in transit. You have looked at style 9. The item “Wooden Driveway Gates Offset Made To Measure Service” is in sale since Tuesday, October 1, 2019. This item is in the category “Garden & Patio\Garden Fencing\Garden Gates”. The seller is “woodhutgates” and is located in scunthorpe, Lincolnshire. This item can be shipped to United Kingdom.
  • Sub-Type: Gates
  • Modified Item: No
  • Country/Region of Manufacture: United Kingdom
  • MPN: Does Not Apply
  • Custom Bundle: No
  • Material: Wood
  • Brand: Handmade
  • Type: Driveway Gate
  • Mechanism: Dual Swing Gate

Wooden Driveway Gates Offset Made To Measure Service

Kent Style Timber / Wooden / 3/4 + 1/4 Offset Split / Driveway Gates

Kent-Style-Timber-Wooden-3-4-1-4-Offset-Split-Driveway-Gates-01-ggbm Kent Style Timber / Wooden / 3/4 + 1/4 Offset Split / Driveway Gates

Kent Style Timber / Wooden / 3/4 + 1/4 Offset Split / Driveway Gates
HANDMADE TIMBER DRIVE GATES. 3/4 + 1/4 OFFSET SPLIT. We are a small family run business and all our items are handmade by quality craftsmen to a very high standard. These Kent style gates are made from selected Scandinavian redwood, morticed and tennoned joints with 19mm tongue & groove match boarding. All our gates are supplied planed all round and ready for your choice of stain, varnish or paint. We also supply the gate furniture, hinges & posts, please ask for a quote! PLEASE LET US KNOW WHICH SIDE YOU INTEND TO HANG THE 1/4 GATE (LOOKING AT THE REAR VIEW) SO THAT WE CAN POSITION THE DIAGONAL BRACING ACCORDINGLY. ANY ORDERS PLACED IN DECEMBER WILL BE PROCESSED IN JANUARY DUE TO THE CHRISTMAS BREAK. AND WILL RE-OPEN ON THURSDAY 2ND JANUARY. PLEASE NOTE ANY ORDERS PLACED IN DECEMBER WILL BE PROCESSED IN JANUARY DUE TO THE CHRISTMAS BREAK. The item “KENT STYLE TIMBER / WOODEN / 3/4 + 1/4 OFFSET SPLIT / DRIVEWAY GATES” is in sale since Friday, February 1, 2019. This item is in the category “Garden & Patio\Garden Fencing\Garden Gates”. The seller is “jsjoinery6165″ and is located in Nottingham, Nottinghamshire. This item can’t be shipped, the buyer must pick up the item.
  • Brand: Unbranded
  • MPN: Does Not Apply
  • Country/Region of Manufacture: United Kingdom
  • Sub-Type: Gates

Kent Style Timber / Wooden / 3/4 + 1/4 Offset Split / Driveway Gates

Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates

Cottage-Style-Timber-Wooden-3-4-1-4-Offset-Split-Driveway-Gates-01-fr Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates
Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates
Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates

Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates
HANDMADE TIMBER DRIVEWAY GATES. 3/4 gate + 1/4 gate. Constructed from heavy duty 4×2 timber or 4×2 timber depending on the sizes. We are a small family run business and all our items are handmade by quality craftsmen to a very high standard. These gates are made from PEFC renewable, sustainable, selected Scandinavian redwood, morticed and tennoned joints with 19mm tongue & groove match boarding. All our gates are supplied planed all round and ready for your choice of stain, varnish or paint. We highly recommend using a good quality protection on the gates, such as Sadolins “oil based” but NOT any “water based” products! Please let us know which side you intend to hang the 1/4 gate when ordering, so that we can position the diagonal bracing accordingly! Please view our other items for different style gates! ANY ORDERS PLACED IN DECEMBER WILL BE PROCESSED IN JANUARY DUE TO THE CHRISTMAS BREAK. AND WILL RE-OPEN ON THURSDAY 2ND JANUARY. PLEASE NOTE ANY ORDERS PLACED IN DECEMBER WILL BE PROCESSED IN JANUARY DUE TO THE CHRISTMAS BREAK. The item “COTTAGE STYLE TIMBER / WOODEN / 3/4 + 1/4 / OFFSET SPLIT / DRIVEWAY GATES” is in sale since Thursday, January 31, 2019. This item is in the category “Garden & Patio\Garden Fencing\Garden Gates”. The seller is “jsjoinery6165″ and is located in Nottingham, Nottinghamshire. This item can’t be shipped, the buyer must pick up the item.
  • Brand: Unbranded
  • MPN: Does Not Apply
  • Country/Region of Manufacture: United Kingdom
  • Sub-Type: Gates

Cottage Style Timber / Wooden / 3/4 + 1/4 / Offset Split / Driveway Gates