Wooden Driveway Gates

Heavy Duty Mortice & Tenoned Oak Driveway Gates. Swan Neck Round Palisade Style. PLEASE NOTE THAT WE CAN MANUFACTURE MORE THAN ONE SET OF GATES IF REQUIRED, PLEASE MESSAGE ME FOR MORE INFORMATION. We have been manufacturing garden products since 2008, we make all our product to last. All timber with come untreated. And will require a wood preservative before installation. You Will Receive a Pair of Oak Driveway Gates Only. (Picture shown is Iroko Plus Sample picture of the oak shown). 70mm x 120mm Stiles. 45mm x 95mm Bracing. 60mm x 60mm Spindles with 30mm radius Chamfer. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins). Height Up to the Top of Rail is 1500mm lowest point, with Decorative Horn which is an additional 5(125mm) Plus rise up to 350mm. The Spindles are 1/3 and the Board is 2/3 of the hight of the gate. On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3900mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.

• Item Width: 3300mm
• Brand: Juke Joinery
• Non-Domestic Product: No
• Type: Driveway Gate
• Custom Bundle: No
• Material: Wood
• type of wood: European Oak
• Modified Item: No
• Mechanism: Dual Swing Gate

Heavy Duty Mortice & Tenoned Oak Driveway Gates. Swan Neck Round Palisade Style. We have been manufacturing garden products since 2008, we make all our product to last. All timber with come untreated. And will require a wood preservative before installation. You Will Receive a Pair of Oak Driveway Gates Only. (Picture shown is Iroko Plus Sample picture of the oak shown). 70mm x 120mm Stiles. 45mm x 95mm Bracing. 60mm x 60mm Spindles with 30mm radius Chamfer. All joints are Mortice & Tenoned plus dowelled for strength. All Rails and bracing is 9 degreed to shred water off. 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins). Height Up to the Top of Rail is 1800mm lowest point, with Decorative Horn which is an additional 5(125mm) Plus rise up to 350mm. The Spindles are 1/3 and the Board is 2/3 of the hight of the gate. On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each. (Picture shown is a 3900mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary). All our Products are Made by Hand by Us. Don’t forget to check out our shop for lots more great stuff.. This item is in the category “Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates”. The seller is “jukestimbersolutionsltd” and is located in this country: GB. This item can be shipped to United Kingdom.

• Item Width: 4200mm
• Brand: Juke Joinery
• Non-Domestic Product: No
• Type: Driveway Gate
• Custom Bundle: No
• Material: Wood
• type of wood: European Oak
• Modified Item: No
• Mechanism: Dual Swing Gate